Please select Into the mobile phone version | Continue to access the computer ver.
M600 Pro bricked ! How to download older version of Assistant 2 ?
4903 17 2020-5-23
Uploading and Loding Picture ...(0/1)
o(^-^)o
Anthony B.
lvl.2
Flight distance : 13832480 ft
  • >>>
France
Offline

Hello,

As I was doing an upgrade of the flight controller of my M600 Pro (A3 Pro), something failed and the upgrade stopped at 75%.

I'm using the very last Assistant 2 for Matrice (v2.0.11) available here https://www.dji.com/fr/downloads/softwares/assistant-dji-2-for-matrice

Here is what the last assistant tells me when I plug the M600 Pro
20df0ccb-1110-4807-9eea-78a688bea4c0.JPG

I then only have access to upgrade panel, no other tab can be used :

f18a5bf5-2dbc-4bca-afc0-29179a5fb3b6.JPG

But upgrade fail even to start
d95c83ed-3743-42e2-a980-61a74a551bf6.JPG

Any idea how to reset the A3 ? or maybe access to older Assitant for matrice ?

Thanks for any help
2020-5-23
Use props
djiuser_4lMWikkc4Iys
lvl.1
United States
Offline

I am having the exact same problem! Essentially the exact same things happened to me as well. Initial firmware upgrade failed around 60%-70%. I disconnected, and restarted the drone. When I powered it back on my computer actually didn't even recognize the M600 anymore and only showed me an option for Lightbridge 2. After I removed all the batteries and waited for a bit it was able to at least recognize the drone but when I tried to do the firmware update it never progressed and gave me the exact same error message. Can't even connect the controller to it anymore and am dead in the water.
2020-6-12
Use props
Anthony B.
lvl.2
Flight distance : 13832480 ft
  • >>>
France
Offline

I solved my problem using the older version V2.0.8 of DJI assistant recommanded on m600 pro specs page. The last version 2.0.11 can’t connect with the “bricked” m600

Hope it helps you
2020-6-12
Use props
djiuser_4lMWikkc4Iys
lvl.1
United States
Offline

Anthony B. Posted at 6-12 10:55
I solved my problem using the older version V2.0.8 of DJI assistant recommanded on m600 pro specs page. The last version 2.0.11 can’t connect with the “bricked” m600

Hope it helps you

The only version of DJI Assistant I'm seeing on the m600pro page takes me to the v 2.0.11 page. Is there a legacy download link somewhere that I'm missing?

Thanks
2020-6-12
Use props
Anthony B.
lvl.2
Flight distance : 13832480 ft
  • >>>
France
Offline

Try that link https://www.dji.com/fr/mobile/downloads/products/matrice600-pro
2020-6-12
Use props
djiuser_4lMWikkc4Iys
lvl.1
United States
Offline

Anthony B. Posted at 6-12 13:05
Try that link https://www.dji.com/fr/mobile/downloads/products/matrice600-pro

You are a hero, that worked perfectly. Thanks!

I've worked with two different DJI drones for my jobs now and the software is just... trash honestly. Hardware is super nice though.
2020-6-12
Use props
Anthony B.
lvl.2
Flight distance : 13832480 ft
  • >>>
France
Offline

Glad I could helped. I struggled myself a full weekend ! Good at least it saved someone else
2020-6-13
Use props
inspectorherb
lvl.1
United States
Offline

Hey could anybody help a poor fellow find V2.0.8 of DJI assistant, been searching all over and no dice and the above link only has 2.0.11 now.
2020-7-24
Use props
inFocus India
lvl.1
India
Offline

Even I had a bad experience with the new version of DJI Assistant 2 v.2.0.12 and old links were dead... Luckily v 2.0.8 was saved on my PC from before...here you go... https://mega.nz/file/4p8UBSBJ#ghI8RiuU8P89rix_F-eAiQeY5EFNZcVWhnG8c7vG6CU
2020-8-1
Use props
fans677db80f
lvl.1
United States
Offline

Anthony B. Posted at 6-13 00:17
Glad I could helped. I struggled myself a full weekend ! Good at least it saved someone else

Hey bud I’m having same issue. Just picked up a m600 from a guy and it flew well. I downloaded assistant for m600 and update failed now it tells me I have wrong firmware. Do you have the older version of the assistant?
2020-8-6
Use props
Keitel Small
lvl.1
United States
Offline

Anthony B. Posted at 6-12 10:55
I solved my problem using the older version V2.0.8 of DJI assistant recommanded on m600 pro specs page. The last version 2.0.11 can’t connect with the “bricked” m600

Hope it helps you

I’m having same issue. I did go to your link and couldn’t get that version. Would you be willing to help me out.
2020-8-6
Use props
Keitel Small
lvl.1
United States
Offline

inFocus India Posted at 8-1 07:11
Even I had a bad experience with the new version of DJI Assistant 2 v.2.0.12 and old links were dead... Luckily v 2.0.8 was saved on my PC from before...here you go... https://mega.nz/file/4p8UBSBJ#ghI8RiuU8P89rix_F-eAiQeY5EFNZcVWhnG8c7vG6CU

Hey bud having same issue. Is there anyway you can send me that older version please.
2020-8-6
Use props
Keitel Small
lvl.1
United States
Offline

inFocus India Posted at 8-1 07:11
Even I had a bad experience with the new version of DJI Assistant 2 v.2.0.12 and old links were dead... Luckily v 2.0.8 was saved on my PC from before...here you go... https://mega.nz/file/4p8UBSBJ#ghI8RiuU8P89rix_F-eAiQeY5EFNZcVWhnG8c7vG6CU

Same issue here man. Would you be kind enough to share that older version with me please.
2020-8-6
Use props
inFocus India
lvl.1
India
Offline

Keitel Small Posted at 8-6 15:56
Same issue here man. Would you be kind enough to share that older version with me please.

Dji wont let post the link ... you have to manually copy and paste the given url in browser ..
https://mega.nz/file/4p8UBSBJ#ghI8RiuU8P89rix_F-eAiQeY5EFNZcVWhnG8c7vG6CU
2020-8-13
Use props
hovgaardradiationsolutions.ca
lvl.1
Canada
Offline

djiuser_4lMWikkc4Iys Posted at 6-12 10:51
I am having the exact same problem! Essentially the exact same things happened to me as well. Initial firmware upgrade failed around 60%-70%. I disconnected, and restarted the drone. When I powered it back on my computer actually didn't even recognize the M600 anymore and only showed me an option for Lightbridge 2. After I removed all the batteries and waited for a bit it was able to at least recognize the drone but when I tried to do the firmware update it never progressed and gave me the exact same error message. Can't even connect the controller to it anymore and am dead in the water.

Had sane problem.
Dowload ver 1.2.5.
Screenshot_20200816-095632_Firefox Focus.jpg
2020-8-16
Use props
Anthony B.
lvl.2
Flight distance : 13832480 ft
  • >>>
France
Offline


Anyone tested the last 2.0.12 update ?
Mu M600 Pro is asking for a new FW but I'm quite scared to do it after the last issues ....
2020-8-26
Use props
RAITINI
lvl.2
Flight distance : 2974823 ft
French Polynesia
Offline

did you have something to fix it?
10-8 20:06
Use props
RAITINI
lvl.2
Flight distance : 2974823 ft
French Polynesia
Offline

hello did you have something to fix it?
10-8 20:09
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules