Hi,
today before storing in drone (MavicMini) in its case I inserted the gimbal cover, but I had not turned off the drone. I heard an electric motor noise (about 1 or 2 seconds) I immediately removed the stop. I then used the drone for 1 hour, and everything worked well, I tried to move the camera with the command and see if it was calibrated, everything ok .. can I feel comfortable or do I have to do something more?

Thanks at all!
Mauro

IF you did a re-calibration and it passed all the tests then you should be good to go.

HurleyBird Productions Posted at 6-2 12:29
IF you did a re-calibration and it passed all the tests then you should be good to go.

I made the calibration did not give any error .. I made an hour of video it seems to me to work well ..

MauroM1982 Posted at 6-2 12:35
I made the calibration did not give any error .. I made an hour of video it seems to me to work well ..

I would say that you are good to go then.

I once accidentally turned on my p3 standard with the gimbal clamp on. The gimbals used to do an diagnostic dance check. I was so worried. Nothing broke though