pwilson
lvl.1
United States
Offline
|
Hello all,
We have a Matrice M600 Pro we have been flying with ground station pro. Lately when we attempt to fly a waypoints mission, the mission will upload to the M600, the M600 will turn towards the starting point and then just sit there hovering and will not start flying the path. The ground station screen on the Ipad will appear that it is in the mission and gives the option to pause just like it normally would but it does not fly anywhere automatically. If you hold forward on the controller it will begin to fly forward and will automattically limit the speed to the speed set from the mission and it will actually turn, ascend and descend following the path set by the waypoints, but only as long as you hold down the forward stick. We tested with someone else's Ipad and it seemed to work fine from there flying a mission on its own as it had before. We reset our Ipad and it worked for one mission and then went back to requiring us to hold forward again. Has anyone experienced this or know how to resolve it? Is there a setting somewhere that enables or disables autonomous flight and requires us to hold the forward stick to follow the flight path? Any assistance would be much appreciated, thanks!
|
|