Hi,

I am flying a 5 inch quad with dji controller and air unit. Flight controller is omnibus f4s.

In Betaflight all inputs to the quad react normally except for the throttle.

A small input say 5% on the throttle gimbal sends the rate from 1000 to 1500 (half throttle) . So small amount of throttle equates to half throttle and the drone is impossible to fly, except at full speed.

As i keep moving the throttle up, the rates slows right down until the gimbal is at half way and then it operates almost normal.

Any advice would be very helpful.

Cheers

Blair....

noob error, i forgot that the dji controller needs to be calibrated through the goggles.

fans8f4d08c2 Posted at 6-10 01:05
noob error, i forgot that the dji controller needs to be calibrated through the goggles.

Were you able to resolve this? I seem to have a similar issue. I wasn't aware there is a calibration needed through the goggles.

Hi,

Yes as soon as I calibrated my controller, initiated through the goggle menu, there problem was resolved.
Cheers