I started getting the message when flying about needing to calibrate the vision sensors. I have the DJI Assistant app on my PC and I have tried several times to calibrate the vision sensors, it seems to work then at the final moment when it is completing the task with the progress bar I get the below error message.

I have uninstalled the DJI Assistant app twice and also tried it on a second PC at my home, twice and I continue to get the same error message so please do not tell me to try a friends computer or reinstall the app.

Any ideas what is causing this error message, is it safe to fly at the moment with this happening? My Mavic 2 Zoom does not appear to have any issues if I am continuing to fly but just want to ask to be safe.

A few people have had this pop up recently. I did mine and this tutorial helped me get it right  -

Hello there Phugoid. I am sorry to know that you are having issues in calibrating the sensors of your DJI Mavic 2 Zoom. Please try to calibrate the said drone using a monitor display of 14 inches or bigger is recommended for the calibration. Please set the display’s resolution to the recommended default value. ( Usually, the 14-inch display’s resolution should be set at 1366*768 or 1440*900. The 17-inch display’s resolution: 1366*768 or 1280*720. The 19-inch display’s resolution: 1366*768 or 1440*900. The 22-inch display’s resolution: 1680*1050 or 1920*1080. The 24-inch display’s resolution: 1920*1080 or 1920*1200.) Thank you.

DAFlys Posted at 6-19 01:39
A few people have had this pop up recently. I did mine and this tutorial helped me get it right  - https://www.youtube.com/watch?v=XdGtZBrIe9A

I am with Mavic2 Zoom.

This is exactly what i did so many times and still no avail...
I received the vision sensor calibration notification on the app since few weeks ago when i was in previous firmware v01.00.0510.
another thread in this forum suggests to update to the latest firmware, so right now i am on v01.00.0670.
they also said to calibrate IMU compass and gimbal as well, and I've done it all too.

But the result is just the same as the picture i post here.

AFAIK the aircraft still able fly normally and able to detect obstacles as it should.
I can't find any misbehave or something else, but that vision warning notification is still bugging my mind.