Please select Into the mobile phone version | Continue to access the computer ver.
Upward gimbal and Manifold 2 on M210 RTK v2
106 6 6-21 12:33
Uploading and Loding Picture ...(0/1)
o(^-^)o
dp7102
lvl.2

Israel
Offline

Is it possible to install Manifold 2 together with upward gimbal+camera on Matrice 210 RTK v2?

6-21 12:33
Use props
kv886
lvl.3

South Africa
Offline

My suggestion is that Manifold 2 and gimbal should not be installed on the upward of the drone at the same time
6-23 20:16
Use props
dp7102
lvl.2

Israel
Offline

kv886 Posted at 6-23 20:16
My suggestion is that Manifold 2 and gimbal should not be installed on the upward of the drone at the same time

Thank you very much for response!
Could you please specify why you don't recommend to install both Manifold 2 and gimbal on the top of M210 v2 RTK.
Also, is there any other option of installation of these two parts together (not both on the top of drone) on M210 v2 RTK.
Thanks again.
6-23 21:28
Use props
kv886
lvl.3

South Africa
Offline


You know the space on the top of the drone is very limited. The Manifold may block the rotation of the gimbal. Why not install the gimbal under the drone? Please see the picture on DJI official website.
6-24 02:11
Use props
dp7102
lvl.2

Israel
Offline

kv886 Posted at 6-24 02:11
You know the space on the top of the drone is very limited. The Manifold may block the rotation of the gimbal. Why not install the gimbal under the drone? Please see the picture on DJI official website.
[view_image]

Thank you for your response! The reason to use upward gimbal on the top of the drone is to take imagery of the surface above the drone, when the camera is pointed upwards. So the idea was to install upward gimbal connector on the top of the Manifold 2 (or with some horizontal shift relative to position of Manifold). The thing is that I didn't see a description of such installation in the Web, and I don't know if such installation is possible at all with M210 RTK.
6-27 22:05
Use props
内涵阿哥
lvl.2
Flight distance : 791867 ft
  • >>>
China
Offline

Another suggestion may be possible,  the OSDK and PSDK  integrate together,  this will help us define more action with the camera system.  that would be really  helpful.
6-27 22:30
Use props
dp7102
lvl.2

Israel
Offline

内涵阿哥 Posted at 6-27 22:30
Another suggestion may be possible,  the OSDK and PSDK  integrate together,  this will help us define more action with the camera system.  that would be really  helpful.

As both Manifold 2 and upward gimbal (and upward gimbal connector) are manufactured specifically for Matrice 200 series, I just wanted to verify first if there is any existing installation solution for native DJI equipment.  Thanks!
6-28 03:32
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules