Does anyone (especially our DJI friends) know when the iOS version of the DJI Fly app will be released that brings it inline with Android 1.1.5, and more importantly, the latest MA2 FW update

What is meant (by "latest firmare update")...?

frankymusik Posted at 6-22 13:36
What is meant (by "latest firmare update")...?

Exactly what it says - the recent FW update to the MA2
v01.00.0250

I’m bumping this to hopefully prompt a response from DJI

And bumping again.... come on DJI Stevens or someone in the team, please pass this question to the tech team

I don't understand your concern . I am using an IOS device, my DJI Fly app is version 1.1.3 and the firmware of the MA2 is v1.00.0250.
I was able to update the firmware to this version on June 15, 2020

LSC Posted at 6-23 03:39
I don't understand your concern  . I am using an IOS device, my DJI Fly app is version 1.1.3 and the firmware of the MA2 is v1.00.0250.
I was able to update the firmware to this version on June 15, 2020

The release note on the firmware from DJI for FW v.01.00.0250 is stated as being compatible with iOS Fly App version 1.1.14. Whilst you can upgrade the FW using the current version 1.1.13 and fly the drone with no issues (as I have done several times since upgrading the FW using 1.1.13) some of the new features from the FW can not be used until the app is updated. It's been over a week since the FW release came out and we still don't have the latest app version on iOS to work with it (unlike Android who have).

LSC Posted at 6-23 03:39
I don't understand your concern  . I am using an IOS device, my DJI Fly app is version 1.1.3 and the firmware of the MA2 is v1.00.0250.
I was able to update the firmware to this version on June 15, 2020

A J Posted at 6-23 03:47
The release note on the firmware from DJI for FW v.01.00.0250 is stated as being compatible with iOS Fly App version 1.1.14. Whilst you can upgrade the FW using the current version 1.1.13 and fly the drone with no issues (as I have done several times since upgrading the FW using 1.1.13) some of the new features from the FW can not be used until the app is updated. It's been over a week since the FW release came out and we still don't have the latest app version on iOS to work with it (unlike Android who have).

I know the release nodes and also the note with the app version 1.1.14 , but the question was, as I understood it, about updating the firmware to version 1.00.0250. And this is possible with the app version 1.1.13.

LSC Posted at 6-23 04:03
I know the release nodes and also the note with the app version 1.1.14 , but the question was, as I understood it, about updating the firmware to version 1.00.0250. And this is possible with the app version 1.1.13.

He stated "to bring it in line with the current FW" which is actually correct. He didn't state he couldn't fly with 1.1.13.

LSC Posted at 6-23 04:03
I know the release nodes and also the note with the app version 1.1.14 , but the question was, as I understood it, about updating the firmware to version 1.00.0250. And this is possible with the app version 1.1.13.

That is not what I said

A J Posted at 6-23 04:11
He stated "to bring it in line with the current FW" which is actually correct. He didn't state he couldn't fly with 1.1.13.

This is exactly what I said

So, DJI FLY App v 1.1.5 for iOS is out. Can we all be happy and be friends now

LSC Posted at 6-23 19:49
So, DJI FLY App v 1.1.5 for iOS is out. Can we all be happy and be friends now

Until 1.1.16 is due out

LSC Posted at 6-23 19:49
So, DJI FLY App v 1.1.5 for iOS is out. Can we all be happy and be friends now

Hey, I had no issues with you!  Good to see we’ve finally aligned between iOS and Android......

We can all complain about the same things now!

Hello there. Thank you for reaching out. The iOS DJI Fly V1.1.5 has been released on June 24, 2020. Here is what’s new to the said update :
- Updates icons for the remote controller signal and GPS signal.
- Adds Target Scanning toggle in Control settings. When enabled, aircraft will automatically scan and display targets in the Camera View (only compatible with DJI Mavic Air 2).
- Free Hyperlapse mode now supports the Spotlight function. After users drag a box to select a target, the target automatically stays centered in the shot (only compatible with DJI Mavic Air 2).
- Fixes crashing issues and improves app stability.
Thank you.

LSC Posted at 6-23 04:03
I know the release nodes and also the note with the app version 1.1.14 , but the question was, as I understood it, about updating the firmware to version 1.00.0250. And this is possible with the app version 1.1.13.

... that's exactly what I meant by my request!