Please select Into the mobile phone version | Continue to access the computer ver.
In m210 v2, video is not received according to the usb mode.
56 1 6-24 00:41
Uploading and Loding Picture ...(0/1)
o(^-^)o
nearthlab
lvl.2
Flight distance : 25125 ft
South Korea
Offline

m210 v1 and v2 are great products. However, there are some problems when used with manifold2.
On m210 V2(RTK, nonRTK both), The problem I encountered is that depending on the USB mode, the video(x5s) cannot be received at crystal-sky display.

1.When changing the USB mode to PC mode using the slide switch,
manifold can detect m210 USB / but, video from gimbal camera(x5s) not display on crystal-sky display with ERROR 'sd card is not enough'
Image from iOS (3).jpg




2. If setting the USB mode to mobile mode,

manifold can not detect m210 USB / video display on crysta-sky display


but, on m210 V1 with same manifold it didn't happened.
Even if you connect the m210 and the computer (Linux), it happens again.
ofcourse i activated every flights, update firmwares/apps,  enable USB port to fly. there are enought volumes in SD card.


Are there any solutions to solve this USB mode problem???




6-24 00:41
Use props
内涵阿哥
lvl.2
Flight distance : 791867 ft
  • >>>
China
Offline

This is not an error,   it related with the solution that designed.

USB mode  -   this means the camera storage would treat as a SD card or so,  no  live stream at this time since the ethnet is break.
ETH mode -  normally,  it would be this mode,  usb would be act as ethnet, the live stream can transfer normally.
6-27 22:27
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules