Hi! I am wondering what the easiest way to independently power one of these DJI Air Units: https://m.dji.com/product/dji-fpv-air-unit - I want to 3D print mount that I can switch between multiple RC cars and I'd like to just power the DJI unit with its own battery rather than wire it straight into the RC wiring. Does anyone have a good suggestion how to do that? Many thanks for the help!

yep! best way to do that would be to get some small fpv packs (like 500mah) and wire up a connector to the air unit. you can see something like that here (8:56)

Kreeze Posted at 6-26 16:56
yep! best way to do that would be to get some small fpv packs (like 500mah) and wire up a connector to the air unit. you can see something like that here (8:56) https://youtu.be/d3mX2phvmu8?t=536

Oh cool yea that's perfect!  And a really neat idea with the sea plane.  So he says wire it up with a 2s connection, does that mean he's just plugging in a 2S lipo battery into it?  I'd be really grateful if you could link an fpv pack you recommended im a little concerned on frying my unit haha

TastyJams Posted at 6-26 17:52
Oh cool yea that's perfect!  And a really neat idea with the sea plane.  So he says wire it up with a 2s connection, does that mean he's just plugging in a 2S lipo battery into it?  I'd be really grateful if you could link an fpv pack you recommended im a little concerned on frying my unit haha

yes, the input voltage is 7.4v-17.6v so it has to be at least 2s. i like RDQ batteries https://www.racedayquads.com/col ... -micro-battery-xt30