Hello all,

  

We need to reset the Manifold, using System Recovery (following the User Guide) with the Official DJI Image.

  

In Recovery Mode, the command “$ sudo ./flash.sh jetson-tx2 mmcblk0p1” failed to succeed, so we tried again.

  

Again, it failed to succeed with errors in removing the previous files in the Manifold, such as:

  

    rm: cannot remove 'mnt/opt/ros/kinetic/setup.zsh': Read-only file system
    rm: cannot remove 'mnt/proc': Read-only file system
    clearing ext4 mount point failed.

  

  

The “$ sudo ./flash.sh jetson-tx2 mmcblk0p1” command fails with “sudo su” command too. We are not able to force remove the files inside the Manifold.

  

  

Does anybody know how to solve this? Any help is highly appreciated, thank you!

  
  

  

  

  

Try sudo ./flash.sh -R rootfs jetson-tx2 mmcblk0p1 . Taken from the pixhawk controller

Of course you may try to umount before the flash.sh invocation find /mnt/ -type d -maxdepth 1 -exec umount {} \;

heliaetus Posted at 7-8 01:21
Try sudo ./flash.sh -R rootfs jetson-tx2 mmcblk0p1 . Taken from the pixhawk controller

Of course you may try to umount before the flash.sh invocation find /mnt/ -type d -maxdepth 1 -exec umount {} \;

The new sudo command did not work, new errors appeared, but we were able to reach a bit further. Thank you for your suggestion.

I think it is related to not enough memory space on the machine we are operating (Dual boot Ubuntu 16.04 with 33 GB available). We are now trying it again on a VM VirtualBox with 300 GB of space.  WIll report after!

The manual calls for 32GB free disk space, but your error has nothing to do with lack of space

heliaetus Posted at 7-9 04:08
The manual calls for 32GB free disk space, but your error has nothing to do with lack of space

I know but we were just trying everything, considering all possibilities... The machine is going to the seller now. Thank you for your help

recap Posted at 7-13 04:14
I know but we were just trying everything, considering all possibilities... The machine is going to the seller now. Thank you for your help

Best of luck in your endeavor