Hello All,

I am having some very strange issues with my Inspire 2 and x5s.
After a very gentle crash into a tree. Where the drone was simply captured by the branches. No significant impact or damage was observed.
After an attempt to fly the drone again revealed an issue with the camera. Everything with the drone works fine. It flys with the camera video feed and camera settings working normally. But, when I go to take a photograph the video feed freezes and the shutter button in the app spins for about 6 seconds. Video feed returns and on the HUD display where it shows SD card capactity it quickly shows "SD Card Initializing..."  but no picture has been taken or saved. If I go to switch to video mode or record video the video feed goes black and white this time and also freezes. After 6 seconds it returns to photo mode.
I have tried all obvious ways of resseting repairing.  
1. flashed firmware.
2. formatted SD
3. Installed new SD and formatted.
4. With and without SSD installed.
5. Formatted SSD
6. Cleared cache and all settings in app then unistalled, rebooted mobile device and reinstalled app.
7. Popped the 'hood' / nose cone and looked for loose ribbon cords coming from camera to brain.

All proved hopeless and showed no signs of fixing the issue.I am reaching out here to see if there is something I missed, is this a known issue, or some other way to give the drone a refresh. It seems glitched in some way...
I am thinking that there is something wrong with the SD reader or something. I dont know. I put an SD card in the drone with shots from a past shoot from the I2 and they show in the playback gallery. So the drone recognizes and can read SD cards.
This is a perplexing issue and I cant seem to find anything like it online in these forums and beyond.
Any help or insight would be greatly appreciated.
Thank you!
JB

You might want to post your question in the 'products' section of this forum.
That is (way) more active!

PS, I have no idea, since I don't own one!