Hi,
My Spark do not start one engine.
It’s seems all system are ok, but when i start a take off procedure one engine do not work.
The message is: “take off error. Check motor and props.”
O checked it, and appear in very weel condition, and after many swith off’s and on’s it work.
But now few days later it happened again.
Have you affect by the same issue?
Thanks

Have you swapped out the props?

A J Posted at 7-22 10:02
Have you swapped out the props?

I just moved the props to see if it was blocked by dust or something. I didn’t change or took out, but I’ll try. Thanks for the tip.

Marcelo Bandeira Posted at 7-22 10:17
I just moved the props to see if it was blocked by dust or something. I didn’t change or took out, but I’ll try. Thanks for the tip.

That can sometimes cause these errors - especially if the props are bent or damaged

A J Posted at 7-22 10:28
That can sometimes cause these errors - especially if the props are bent or damaged

I’m at work now, fully of apreension to got home and try it. ASAP after the test i’ll replay the result. many Thanks

Marcelo Bandeira Posted at 7-22 10:33
I’m at work now, fully of apreension to got home and try it. ASAP after the test i’ll replay the result. many Thanks

A J Posted at 7-22 10:33

It’s work, it’s done, it’s awesome!!!
Many Thanks, your tip saved a bunch of dollars.
Thanks for your help.
God bless u flights!!!

Marcelo Bandeira Posted at 7-22 17:07
It’s work, it’s done, it’s awesome!!!
Many Thanks, your tip saved a bunch of dollars.
Thanks for your help.

Well done - glad to help

Hello there Marcelo Bandeira. I am sorry for the trouble this has caused before and it is great to know that after checking the propellers of your DJI Spark the issue was resolved as advised by AJ on this thread. If you have any other concerns or inquiries with your DJI Spark or with DJI. Please feel free to post it here at DJI Forum. Have a safe and a happy flying always.