Helmut Ruch
lvl.3
Germany
Offline
|
Hello,
I'm locking for the same information. I found a windows program called "CosmoViewer", from which you can control the Osmo Action. Have a look at this page:
http://cosmostreamer.com/products/dji-go-windows/
With the help of WireShark you can capture and analyse the wifi-trafik between CosmoViewer and the camera. The problem with CosmoViewer is, that it starts video streaming immediately after connecting to the camera. I asked the makers of the program, if there is a possibility to control the camera without streaming, but till today they didn't answer.
I'll put a copy of a WireShark capture here:
https://www.dropbox.com/s/d0k7uy ... apture5.pcapng?dl=0
The communication between program and camera begins, where 192.168.2.7 (CosmoViewer) first sends a datagram to 192.168.2.1 (Camera).
Here is a screenshot from the beginning of the session:
https://www.dropbox.com/s/yo2r1fo1hccnv86/WireShark-Capture.jpg?dl=0
Those programmers of CosmoViewer should have the knownledge for making a remote control for the OA... |
|