Hi all,I am using a matrice 300 rtk with a H20T. I can't get the https://github.com/dji-sdk/Mobile-SDK-iOS/ swift example to fully work. Specifically, I can't get any video to display when I enter 'FPV' (the page remains blank). Maybe the sample needs to be updated? I had a bit more success with the ObjC sample.

I have the same trouble with it and success to write my own logic after referring to the OC one.

想养一条边牧 Posted at 8-13 19:33
I have the same trouble with it and success to write my own logic after referring to the OC one.

Thanks for the tip, I will try doing the same. If you could share some tips or even code for the adjustments you made, I would be grateful. Thanks again!

Hi, I just solved this in Swift. (I got from CN forum)
You need to get the latest sample from DJI, compare and replace with my code in viewDidLoad().
P/S: If you run on your own project, please add 2 file: VideoPreviewerAdapter.swift & DecodeImageCalibrateLogic.swift

Hi..

I have tried your solution.. It is not working for me..

I am really in trouble.. I am not able to assign source for M300 - using OcusyncLink. when I try to assign it gives me error. Please see below.

I have tried various combinations:
Primary - Secondary channel - error code
1. FPV - LEFT - 1008
2. FPV - TOP -1008
3. FPV - RIGHT -1008
4. FPV - FPV -1005
5. TOP - FPV - 1008
6. LEFT - FPV - 1008
7. RIGHT - FPV - 1008
8. MAIN - FPV - 1005
8. FPV - MAIN - 1005

I believe because of that I am not getting feed from drone..

Please help me out..

Best Regards,
Himanshu

I had exactly same trouble and resolved in this way.

https://github.com/dji-sdk/Mobile-SDK-iOS/issues/407

Hi Nearthlab..

Thanks for replying.

I have tried same solution provided by DJI Developer on link provided by you (https://github.com/dji-sdk/Mobile-SDK-iOS/issues/407)..

It did not worked..

One thing I forgot to mention that my drone(M300) do not have SD card.. Is that could be issue in assigning source??

Best Regards,
Himanshu