So I guess this is my bragging moment but after months of planning and saving I have finally completed my custom case with accessory storage. I also wanted to post this to share what I came up incase any new flyers were trying to come up with a plan as well. I went with an Apache hard case and then I fully customized the foam at MyCaseBuilder.com. I was able to put everything I would need on a flight in this case. The red top containers hold all the little accessories (spare blades, wipes, spare sticks, all the power connectors, SD cards, lens removal tool, etc.). It even holds my Galaxy Tab S6 10" tablet. Thanks for taking a look.

Dirty Bird Posted at 8-13 18:54
Very cool.  I like the way it all uniquely blends together with the drone.

Thanks, and I wasn't sure if anyone would pick up on my color scheme.

That's an impressive setup

Hello there Cavu Films. Thank you for reaching out and for posting these photos of your new DJI Mavic 2 Prop carrying case and accessories. This case looks sturdy and cool. Great find and thank you for your support.

Very cool looking set up

Very very nice,  couple of questions,  How are you cutting the foam so nicely?  And where did the tubes with the red lids come from?

DAFlys Posted at 8-14 00:54
Very very nice,  couple of questions,  How are you cutting the foam so nicely?  And where did the tubes with the red lids come from?

The foam was custom cut from this website (Mycasebuilder.com) and cost roughly $90 and the case was only $45 so it comes in way under a name brand case. There is an online template that allows you to pick the type of cutouts you need, customize the depth of the cutouts, and even make custom cutouts from drawings or pictures of what you are putting into the case. The containers are available at Home Depot (https://www.homedepot.com/p/VIEW ... -N&modalType=drawer) but the ones I got were 2.75" wide and 5" tall which hold all the small accessories.

Woe Posted at 8-13 21:34
That's an impressive setup

Thank you very much.

DJI Stephen Posted at 8-13 23:16
Hello there Cavu Films. Thank you for reaching out and for posting these photos of your new DJI Mavic 2 Prop carrying case and accessories. This case looks sturdy and cool. Great find and thank you for your support.

Thank you.

A J Posted at 8-13 23:54
Very cool looking set up

Thanks a lot.

Cavu Films Posted at 8-14 07:31
Thanks a lot.

You're welcome

Cavu Films Posted at 8-14 07:30
Thank you very much.

you're welcome.

Ramon Posted at 8-15 03:33
GUAPISIMO y todo muy limpio.saludos

Muchas gracias

Cavu Films Posted at 8-14 07:25
The foam was custom cut from this website (Mycasebuilder.com) and cost roughly $90 and the case was only $45 so it comes in way under a name brand case. There is an online template that allows you to pick the type of cutouts you need, customize the depth of the cutouts, and even make custom cutouts from drawings or pictures of what you are putting into the case. The containers are available at Home Depot (https://www.homedepot.com/p/VIEW ... -N&modalType=drawer) but the ones I got were 2.75" wide and 5" tall which hold all the small accessories.

thanks for the info,  very helpful.

Great looking setup!

DAFlys Posted at 8-16 01:33
thanks for the info,  very helpful.

No problem at all.

ALABAMA Posted at 8-16 07:18
Great looking setup!

Thank you very much.

Way cool set-up

Cavu Films Posted at 8-14 07:31
Thank you.

Hi there Cavu Films. You are very much welcome and thank you for the reply. Have a safe and a happy flying always.

Lucas775 Posted at 8-17 17:26
Way cool set-up

Thanks a lot.

I'm truly impressed! Very good job!

I do like that "swiss blade"-like cards holder. Where did you find it? I checked Amazon (Italian website), but it has a different model, it holds mostly full size SD cards, I would like a microSD holder model.

Thank you!

Cavu Films Posted at 8-14 07:25
The foam was custom cut from this website (Mycasebuilder.com) and cost roughly $90 and the case was only $45 so it comes in way under a name brand case. There is an online template that allows you to pick the type of cutouts you need, customize the depth of the cutouts, and even make custom cutouts from drawings or pictures of what you are putting into the case. The containers are available at Home Depot (https://www.homedepot.com/p/VIEW ... -N&modalType=drawer) but the ones I got were 2.75" wide and 5" tall which hold all the small accessories.

Wow! This is good info, and wish I'd seen it before ordering my hard case. By the way - You're a perfectionist nerd lol! I totally mean that in a good way. I've never seen a nicer setup and can tell that you love your bird. Congrats on achieving what you wanted. Thanks for posting all the links too

IrishStones Posted at 8-28 10:01
I'm truly impressed! Very good job!

I do like that "swiss blade"-like cards holder. Where did you find it? I checked Amazon (Italian website), but it has a different model, it holds mostly full size SD cards, I would like a microSD holder model.

Thank you very much. Here is the link to the Amazon site I got it from in the US. If you aren't able to order it then let me know and I'll help you get it.
https://www.amazon.com/gp/product/B077V5ZQL6/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

TrevorSK Posted at 8-28 13:27
Wow! This is good info, and wish I'd seen it before ordering my hard case. By the way - You're a perfectionist nerd lol! I totally mean that in a good way. I've never seen a nicer setup and can tell that you love your bird. Congrats on achieving what you wanted. Thanks for posting all the links too

No offense taken and thanks for the compliments. It took a while to get it all arranged the way I wanted but I think it worked out pretty good int he end. Thanks again.

Awesome paint job, and matching case!

Kentucky_Ranger Posted at 9-1 19:15
Awesome paint job, and matching case!

Thank you very much

that's cool

bikoo Posted at 9-4 02:44
that's cool

Thank you very much.

very nice indeed !!!

Very nice. I like the way the case carries everything including the tablet.

Tasos GR Posted at 9-7 09:46
very nice indeed !!!

Thank you very much.

BigBird-2 Posted at 9-7 11:27
Very nice. I like the way the case carries everything including the tablet.

Thanks. I definitely wanted to get everything you need into the case and I think I succeeded.

Very nice indeed.  Great job on putting that together.
I will keep the Mycasebuilder.com website for future reference.

Nice setup

K6CCC Posted at 9-9 20:17
Very nice indeed.  Great job on putting that together.
I will keep the Mycasebuilder.com website for future reference.

Thanks a lot and it is totally worth it.

dronespilot Posted at 9-9 21:10
Nice setup

Thank you.

Cavu Films Posted at 9-10 07:33
Thank you.

You're welcome.

Very clever work!