I had to downgrade lastest (v01.00.0670) FW because of weak signal and transmition freez to v01.00.0510 but gimbal issue did back.
FW v01.00.04.00 was the best for my opinion so far. I'd like to back to that version.
DJI, please, bring FW v01.00.04.00 back in Assistant, I have to work!
I am on the latest firmware and have no problems. I know that does not help you, but maybe there is something else wrong with your drone ? Let's see if anyone else complains.
DAFlys Posted at 8-20 00:11
How weak is your signal with the latest firmware. I can't decide if its actually worse or not.
I got freezing video even in 20-30 m distance in open area. Never before has such situation in much further away flight. I generally fly in built-up areas with high interferences. On 0400 FW had no such problems
Mavic57pro2 Posted at 8-19 13:53
I am on the latest firmware and have no problems. I know that does not help you, but maybe there is something else wrong with your drone ? Let's see if anyone else complains.
What set do you have? I use M2P+SC. SC on latest FW (v01.00.0700)
Dirty Bird Posted at 8-19 15:23
You won't be able to roll back beyond .0510. Anti-roll back was written in beginning with the .0500 firmware. Once you update to .0500 or later you are stuck. Sorry to bring bad nees.
Before a 0670 I was able to to roll 0510 to 0400 back using Assistant.
Hi. I am sorry for the trouble this has caused. With regards to the firmware concern. I do apologize it is not recommended to roll back to the previous firmware this may affect some features in the drone. For the connectivity issue. Kindly please refresh the firmware of both the drone and the remote controller then please try flying the drone in a different location with less interference. Again I am sorry for the trouble. Thank you.
Dirty Bird Posted at 8-20 14:12
Not sure how you managed that? Those into modding firmware have been seeking a solution to the anti-rollback implemented with .0500 for about a year. You could have claimed the bounty!
Magic or DJI gave me a last chance?
Never modded any FW.
DJI Paladin Posted at 8-21 11:34
Hi. I am sorry for the trouble this has caused. With regards to the firmware concern. I do apologize it is not recommended to roll back to the previous firmware this may affect some features in the drone. For the connectivity issue. Kindly please refresh the firmware of both the drone and the remote controller then please try flying the drone in a different location with less interference. Again I am sorry for the trouble. Thank you.
Plese, try to understand, v0510 adds gimbal issue (post), v0670 adds video transmission issue even in clear open area. I didn't have those issues with v0400! I don't need 6km range when my gimbal goes crazy and video freezes in 100m!
DJI Paladin Posted at 8-21 11:34
Hi. I am sorry for the trouble this has caused. With regards to the firmware concern. I do apologize it is not recommended to roll back to the previous firmware this may affect some features in the drone. For the connectivity issue. Kindly please refresh the firmware of both the drone and the remote controller then please try flying the drone in a different location with less interference. Again I am sorry for the trouble. Thank you.
Updated to v01.00.0670, next refreshed it. Did full cllibration the aircraft after that.In the field did gimbal calibration just before a start. Gimbal did shaking during flight again.
With v.0400 didn't have that issue even in strong wind look at that
Thank you for the additional information. I am sorry to know that the issue still persists, after completing these troubleshooting steps. Since the issue still persists. It would be best to contact our DJI support team to further diagnose the cause of the issue, Rest assured our DJI support team will do their best to assists you regarding this concern. Again, I am sorry for the trouble. Thank you.
DJI Paladin Posted at 8-28 13:37
Thank you for the additional information. I am sorry to know that the issue still persists, after completing these troubleshooting steps. Since the issue still persists. It would be best to contact our DJI support team to further diagnose the cause of the issue, Rest assured our DJI support team will do their best to assists you regarding this concern. Again, I am sorry for the trouble. Thank you.
Do you suggest the upgrading a firmware demaged my mavic's gimbal? With .0400 everything was ok.
Does DJI give a replacement M2P? I need it towork.