Does anyone know how to export the sphere photo taken on a Mavic air 2? I can get the pano off the card but I want the sphere. I have tried the Theta app and it's ok but i feel the resolution is lower than the pano.

Any help would be great! thanks!

Upload it to skypixel first, then you will be able to export the sphere.

Hi. Thank you for reaching out to DJI Forum. With regards to this query. Please follow the advised of Woe at post #2 with regards to exporting the sphere. At the same time you can also use a third party post processing software for manual stitching. Thank you.

DJI Paladin Posted at 8-27 06:13
Hi. Thank you for reaching out to DJI Forum. With regards to this query. Please follow the advised of Woe at post #2 with regards to exporting the sphere. At the same time you can also use a third party post processing software for manual stitching. Thank you.

Great! How do i export from skypixel?

Paul Jakob Posted at 8-27 09:41
Great! How do i export from skypixel?

Did you manage to get this going? I uploaded to Sky Pixel and can see the sphere but can't see how to export that globe as an image?

Woe Posted at 8-26 12:40
Upload it to skypixel first, then you will be able to export the sphere.

Thanks Woe I have the same issue as Paul, Can't see how to export the actual sphere from Skypixel

BondiBoy Posted at 9-3 23:16
Thanks Woe I have the same issue as Paul, Can't see how to export the actual sphere from Skypixel

You need to copy the HTTPS then paste as a video on here

A J Posted at 9-3 23:32
You need to copy the HTTPS then paste as a video on here

I found a solution to give me the globe image rendering I was after;

Upload the 360 pano image to Skypixel (I did this from the mobile from the Fly app)
Go to dekstop and view your image from your "My page" in Profile
Right-click to view the "Little Planet" and you have the globe/sphere rendering.
Save that image.

BondiBoy Posted at 9-3 23:49
I found a solution to give me the globe image rendering I was after;

Upload the 360 pano image to Skypixel (I did this from the mobile from the Fly app)

Yep - that will give you a few options to chose from but I find copying the https address and pasting it easier.

BondiBoy Posted at 9-3 23:16
Thanks Woe I have the same issue as Paul, Can't see how to export the actual sphere from Skypixel

No problem.

BondiBoy Posted at 9-3 23:49
I found a solution to give me the globe image rendering I was after;

Upload the 360 pano image to Skypixel (I did this from the mobile from the Fly app)

I'm right there with you until the last step... how are you saving the image?

djiuser_K3JQBgCUTYAx Posted at 12-4 11:11
I'm right there with you until the last step... how are you saving the image?

As soon as you upload the 360 ​​pano photo to Skypixel you have to check that the photo must become public otherwise others will not be able to view it.
When uploading, public or private is requested.
I hope / think that's the solution.

Hi everyone, I recently bought a Mavic Air 2 and I don't know how to export the 360 pano from skypixel to my laptop, I already exported the 360 pano from Dji fly to skypixel but how can I get it on my laptop now? Here is my 360 pano : https://www.skypixel.com/photo360s/regardez-ma-derni-re-cr-ation-aa88e960-ec53-41d8-9e67-e41d6e429b55
Thank you

Tips:
Take the jpeg photo by downloading it from your SD-Card...you will see a long flat image, with the top like blue washed....
Click right on it and go to Properties and then to Details.
Change Camera Maker to: RICOH
Change Camera Model to: RICOH THETA S
Save.
On Facebook you just upload it as picture and Post it...you will get a 360 degree image.
For other questions feel free to ask as on Facebook: GeoDrone4K

Good luck.

Woe Posted at 2020-8-26 12:40
Upload it to skypixel first, then you will be able to export the sphere.

Thank you.

Cients Posted at 1-28 16:20
Thank you.

No problem.

Woe Posted at 2020-8-26 12:40
Upload it to skypixel first, then you will be able to export the sphere.

Someone PLEASE help me with this, I've wasted a whole day trying to do this and can't find the answer!
I'm using the automatic "sphere" button in the Mini 2, but trying to upload to StreetView or Skylum, they both say something like "Please make sure the aspect ratio of your panorama in pixel width and height is 2 : 1". There must be something messed in my settings?
For "processing" it I'm stitching it in the DJI media maker, which makes the flat wide image of a flat 360... and trying to upload from my iPhone or Mac to any program... with no luck.
I just can't work this out, please help!

A J Posted at 2020-9-3 23:32
You need to copy the HTTPS then paste as a video on here

Paste as a video where? And how?

Pls help.i want to upload sphere photos from my ma2 to facebook.

The result of a Sphere taken on the drone is already a Sphere.  You don't need to do anything, unless you don't like the drone stitching and want to stitch it yourself from the individual files (in that case, you do need to stitch, enlarge to the right ratio and fill in the sky that is missing).

All you need to do is take the single jpg from the sphere and open it in software or a tool that can view it.  Google Photos, Facebook, and Skypixel are all options to view it as a sphere.  If you open it up in standard PC software, it will be flat...

https://www.skypixel.com/photo360s/check-it-31af29eb-e768-49c1-957a-8c3f6e6495cb

https://www.skypixel.com/photo360s/my-product-66c61463-a6f5-41e3-aa7b-e56591679b59

https://www.skypixel.com/photo360s/check-out-my-new-content-e3424a04-a18c-4109-b1e7-a8138b0e98f2?utm_source=copied&utm_medium=PCWeb&utm_campaign=share&sp=0

https://www.skypixel.com/photo36 ... aign=share&sp=0

alejandro243 Posted at 6-15 11:30
https://www.skypixel.com/photo360s/my-product-66c61463-a6f5-41e3-aa7b-e56591679b59

Did you ever get this  to work?

BattlinBob Posted at 8-28 11:15
Did you ever get this  to work?

https://www.skypixel.com/photo36 ... 3-9708-b413dd7daa93

FB: GeoDrone4K Posted at 1-28 10:06
Tips:
Take the jpeg photo by downloading it from your SD-Card...you will see a long flat image, with the top like blue washed....
Click right on it and go to Properties and then to Details.

Camera manufacturer not present, cannot add the field.

here is mine
but
how to bypass the SkyPixel !

https://www.skypixel.com/photo360s/my-product-7afcee97-980b-4aca-9277-4983283ba21a?utm_source=copied&utm_medium=PCWeb&utm_campaign=share&sp=0

https://www.skypixel.com/photo360s/wksm6069-bf79392c-b80c-42dc-82db-e023138c5236?utm_source=copied&utm_medium=PCWeb&utm_campaign=share&sp=0

-----------------------------------

Hi everybody.  I have a really dumb question.  How do I get Skypixel?  I have a Mavic 2 that takes spherical panoramas and I see in this trhread that I can create a 'tiny planet' using Skypixel, but I don't seem to be able to find this Skypixel.  If I search online, I just get some sort of photo competition instead of an app!

https://www.skypixel.com/photo360s/savannah-quarters-sphere-vp

https://www.skypixel.com/photo360s/check-out-my-new-content-4890e5a3-8b76-4b6e-9ed6-0ed3087ba7d5

https://www.skypixel.com/photo360s/check-out-my-new-content-4890e5a3-8b76-4b6e-9ed6-0ed3087ba7d5?utm_source=copied&utm_medium=PCWeb&utm_campaign=share&sp=0

https://www.skypixel.com/photo360s/look-at-this-amazing-piece-i-shot-with-my-dji-equipment-f9c57d16-b364-403b-88ad-6049919e5ddb?utm_source=copied&utm_medium=PCWeb&utm_campaign=share&sp=0

still I haven't able to stitch those 26 photos into 1 single sphere photo in a MAC !

tried Theta, ICE, DJI Media Maker, AutoStitch, etc. etc. ...

could you please help ?

I just want to stitch those 26 files from mi MiNi2 & convert them into 1 single 360 sphere ...