I've never had such problems with FW v.0400 before, until I upgraded to version 0510 and the next version 0670. The gimbal still goes crazy.Last weekend fligts:






Losing connection:


And strange behavior:


What about the maximum transmission distance (6/10 km) promised by DJI?

Exactly  why I have never updated anything in over 3 years.
Perfectly fine, no resets, NFZ "stuff", quizzes, and general other bugs...
Nothing like a factory flashing...

Flycaster Posted at 9-9 07:00
Exactly  why I have never updated anything in over 3 years.
Perfectly fine, no resets, NFZ "stuff", quizzes, and general other bugs...
Nothing like a factory flashing...

I'm at the end of my tether. This prompts me to go to the dark side

Do another firmware refresh then depower, power on again and another firmware refresh, then turn off again and let drone cool down then do a imu calibration, gimbal calibrate and then a compass. It might or might not fix your issue but that is how I always update my drone and never had an issue in the years I have owned Dji.

Try doing a factory reset and go back to the first Firmware and see if that fixes the issue.

Suren Posted at 9-9 10:24
Do another firmware refresh then depower, power on again and another firmware refresh, then turn off again and let drone cool down then do a imu calibration, gimbal calibrate and then a compass. It might or might not fix your issue but that is how I always update my drone and never had an issue in the years I have owned Dji.

I've been doing it all twice, didn't help.

Cavu Films Posted at 9-9 10:40
Try doing a factory reset and go back to the first Firmware and see if that fixes the issue.

Please tell me step by step how to reset the aircraft to factory settings and go back to the first FW.
Notice DJI anti-rollback prevents downgrading FW.

And next issue. Fired up my M2P but no video transmission. What's going on???
1st boot, nothing

2nd boot, nothing


3rd boot, nothing


4th boot a drone and restart GO4 APP helped finaly

This not the first time!

Hi. I am sorry for the trouble this has caused. With regards to this matter. I will forward this concern to our designated DJI support team for further evaluation. Again, I am sorry for the trouble. Thank you.

DJI Paladin Posted at 9-11 09:25
Hi. I am sorry for the trouble this has caused. With regards to this matter. I will forward this concern to our designated DJI support team for further evaluation. Again, I am sorry for the trouble. Thank you.

Thanks for your assistance.
Before upgrading the M2P was my best drone. I don't know what happened. Will I have to send it in for repair? I'd rather not because my I1P is flightless so I will only have Ph4 to work.

Next issue. What's this?


What will I get tomorrow?

And next signal lost. What's about promissed 6km (CE) distance?

Here it is the 26th.................and no further info?   Please advise?

Thx and I hope all gets corrected!!

Randy

rwynant V1 Posted at 9-26 18:43
Here it is the 26th.................and no further info?   Please advise?

Thx and I hope all gets corrected!!

I’ve gave DJI a chance to repair my M2P, last week I took it to the seller under warranty

Yesterday I've got my M2P back. It looks like new or refurbished. Anyway, new gimbal is installed.
Today I'll test it.
Thanks DJI!