Hi,
Did anyone noticed visible frame disruption at MA2 in corners?
I have recorded in internal memory in order to eliminate any issues from card....
H.265, D-Cinelike, 30FPS / 1/60 SS, 4K, no filters.
I put the drone to rotate around a tree...
When I watch on 65inch LG 120Hz from computer (I5, SSD, 16Gb Ram, GTX1060 6Gb, HDMI2.0 Gold contacts), i see at the margins of circle filmed how the image is sometimes skipping (jutter like)...in middle is fine as probably is no movement...but on edge of image, i can see how sometimes skips like 1-2 frames...
I have tried also in 24fps, is more visible...
The circles are set to low speed.
Also this is more visible when rotates and there are lot of buildings, as their shape is vertical and i see disruption...
Will try a 60fps too, in order to eliminate the problem related to number of FPS versus speed of Yaw...but is not so big the speed in order not to be handled....
If you experienced same problem, leave a comment...
Tks.
One example:
At 0:40-0.50 in the right can be seen...Filmed 30fps-1/60SS, imported in 24fps timeline=80% speed. This had PolarPro filter.
Is like there is a problem processing too much data...I don't know....Not even my phone does not do this...
Same behavior in original d-cine. I usualy just improve contrast, shadows and add color...no blur or noise effects.
I will put it in dropbox but is uploading under 3mbps, will take days.
George210477 Posted at 9-13 10:54
Same behavior in original d-cine. I usualy just improve contrast, shadows and add color...no blur or noise effects.
I will put it in dropbox but is uploading under 3mbps, will take days.
The aircraft cannot skip frames, it is recxording an MPEG stream and skip frames are not possible. What you are more likely seeing is the inability of your playback system to handle the video clip.
Second Officer
Captain
