After updating firmware my remote controller is beeping the whole time is open and showing alarm that the battery is low, in the meantime the actual battery indicator is correct % at all times. All functions of the aircraft are working except the beeping that doesnt stop. As soon as i turn on the remote controller it starts beeping.

Welcome Than3566 do a remote controller calibration in the dJI APP , Ii ll calibrate sticks but dial roll too .... Hope it solve the problem

JetSam Posted at 9-14 21:41
Welcome Than3566 do a remote controller calibration in the dJI APP , Ii ll calibrate sticks but dial roll too .... Hope it solve the problem

Have tried this as well with no success in stopping the beeping.

Shall I try to downgrade the firmware maybe this will solve it and try to re-install the Upgrade again?

Do you have any other suggestions as its quite annoying during the flying with the beeping all the time.

Give a try , but do a controller calibration as video shows after Firmware Downgrade or update

JetSam Posted at 9-16 09:07
Give a try , but do a controller calibration as video shows after Firmware Downgrade or update

I had this  happen to me , see the thread below , hope this helps

https://forum.dji.com/forum.php?mod=viewthread&tid=142468