Hi pilots, since the last update I have the impression that the MM behaves strangely, When it is hovering it moves a lot while before the update it was fairly stable, am I the only one in this case ?

That can sometimes be caused by the props - swap them out and see if there is any change mate

A J Posted at 9-19 05:51
That can sometimes be caused by the props - swap them out and see if there is any change mate

hi buddy , the accessories were changed 3 weeks ago and I only used the MM once or twice and it worked very well, then I did the update and did a test and he had this behavior. So I made the link even if I'm not sure.

Maybe do imu calibration?

My mini is stable as ever.

VanzPix Posted at 9-19 06:17
hi buddy  , the accessories were changed 3 weeks ago and I only used the MM once or twice and it worked very well, then I did the update and did a test and he had this behavior. So I made the link even if I'm not sure.

Try refreshing the firmware using assistant 2

amir_KING Posted at 9-19 09:56
Maybe do imu calibration?

thank you but before each flight I do a calibration. :/

A J Posted at 9-19 14:13
Try refreshing the firmware using assistant 2

I'll try this solution thank you

VanzPix Posted at 9-20 05:31
I'll try this solution thank you

You're welcome

You're not the only one, I also noticed that after my recent update.  

Lucas775 Posted at 9-20 12:05
You're not the only one, I also noticed that after my recent update.

huh, was supposed to INCREASE stability

Hello there VanzPix. I am sorry for the trouble this has caused and thank you for reaching out. Kindly please try to refresh the firmware of your DJI Mavic Mini for us to be able to isolate the said issue. Thank you.

https://www.dji.com/mavic-mini/downloads