I have just finished upgrading one of my Smart Controllers to the new firmware. No issues doing the update though it did take some time to go up from 1%.
Using DJI Assistant 2 on an iMac Pro.

Note that you are required to power down the SC and on again before you can Link (Bind) to the Air 2.

The original controller no longer links to the Ai r2. I have not tried dual controls by attempting to bind it again.

Both Goggles now work and provide the same output as the SC screen by connecting it to the Smart Controllers HDMI output. (Correct cable comes with the Goggles)

This should also mean that the goggles will have the same range as the SC.

Happy Flying.
   

Awesome. Thanks for sharing

anything plugged into the hdmi out on the scm will "work" including a simple monitor. this was accomplished in a previous sw update.   this means the goggles will display the scm but it doesn't necessarily means the goggles work with the ma2.  have you tried to control the ma2 with the goggles?  if you can turn your head left and right and move the ma2 then it "works" otherwise it doesn't.

The Saint Posted at 9-23 05:18
anything plugged into the hdmi out on the scm will "work" including a simple monitor. this was accomplished in a previous sw update.   this means the goggles will display the scm but it doesn't necessarily means the goggles work with the ma2.  have you tried to control the ma2 with the goggles?  if you can turn your head left and right and move the ma2 then it "works" otherwise it doesn't.

Yes, to be pedantic head tracking only works when googles are connected to the Goggles Air Units. Partial tracking is available as the secondary controller for a camera operator. But only allows camera Yaw / Tilt as far as I am aware.

The SCM would not link to the Mavic Air 2 so did not work with the goggles.

The latest FW update that allows it to link to the Air 2 allows Google usage.

Thank you for your comment.

Cheers

Hello there bjr981s. Thank you for reaching out and for sharing these information with us. Again, thank you for your valued support and happy flying always.

Thanks for sharing. .  

Thanks for sharing.               

Dear Friends! It means, that I can use Dji goggles with my Mavic Air2 and its original remote controller with all functions of goggles?
Istvan

fansb14cab71 Posted at 12-22 01:18
Dear Friends! It means, that I can use Dji goggles with my Mavic Air2 and its original remote controller with all functions of goggles?
Istvan

Yes just no head tracking.

bjr981s Posted at 12-22 04:14
Yes just no head tracking.

Thank You!

bjr981s Posted at 12-22 04:14
Yes just no head tracking.

How do you bind the goggles with the Mavic Air 2 without the smart controller? Where comes the picture from?

Eckonism Posted at 12-22 09:25
How do you bind the goggles with the Mavic Air 2 without the smart controller? Where comes the picture from?

at this point, it is impossible to bind the ma2 with the goggles under any circumstance.   sorry.

bjr981s Posted at 12-22 04:14
Yes just no head tracking.

That's great!
I'm going to have a go using my Mavic 2 with my goggles tomorrow.

DroneSprayServ Posted at 12-25 13:06
That's great!
I'm going to have a go using my Mavic 2 with my goggles tomorrow.

Please keep us updated on your attempt to bind ma2 to dji goggles.

DroneSprayServ Posted at 12-25 13:06
That's great!
I'm going to have a go using my Mavic 2 with my goggles tomorrow.

When you say Mavic 2 do you mean Mavic Air 2?

The Mavic 2 Zoom and Pro supports the goggles natively by binding to the drone. Goggles RE and Goggles White. The FPV goggles will only bind to the FPV air units.

Mavic Mini 2 has no support at the moment.  

bjr981s Posted at 12-27 02:13
When you say Mavic 2 do you mean Mavic Air 2?

The Mavic 2 Zoom and Pro supports the goggles natively by binding to the drone. Goggles RE and Goggles White. The FPV goggles will only bind to the FPV air units.

Yes I mean Mavic Air 2.
DJI have an issue with product differentiation here. It's an easy mistake to make.