Hello there,
I have problem with Ronin SC, which swings side to side when im turning left or right. Gimbal got latest software and its well ballanced. Roll axis strenght is on about 55%, on higher settings motor is going to shaking. Lowering this setting didnt helped.
Hi there, please follow the suggestions below to see if it works:
1. Balance the Ronin-SC. For more details, watch the tutorial video:
2. Ensure that the knobs on the gimbal are tightened. Check whether the connectors are obstructed by foreign objects.
3. Auto Tune: Go to the Ronin app and enter Auto Tune. There are three tuning aggressiveness profiles so you can adjust the stiffness value: High, Mid, and Low.
After Auto Tune, you can see a detailed motor diagnosis at the bottom of the page. If the gimbal is properly balanced, the power value of the motors should be in the range of ±5. If the power consumption on a particular axis constantly goes beyond the range, balance the gimbal again.
4. Mounting lens support: It is recommended that mount the lens support if you haven't done so.