Hi
When I power on my Spark and set the homepoint, the distance from the homepoint changes itself from 1 to 5 meters even If the drone is not moving or flying.


What can be the problem? I have contacted DJI Live support few months ago and they said I should send the drone to them, But I still flied with it during the summer. It works fine otherwise, only the distance from homepoint is changing even If the drone Is not moving.


I have re-installed the app and tried it on 2 different phones. It has worked fine on every device before the problem appeared this year little bit before the summer.

well my gps would do that on my arkbird autopilot. also the height may go up and down,

ShrillShrew Posted at 10-2 03:57
well my gps would do that on my arkbird autopilot. also the height may go up and down,

I am using DJI Go 4, the app that is meant for Spark.

Try calibrating the IMU

A J Posted at 10-2 12:29
Try calibrating the IMU

I also have calibrated the IMU and the Compass.

Teen Mike Posted at 10-2 19:48
I also have calibrated the IMU and the Compass.

Ship it back to DJI then for a proper diagnostic evaluation.

A J Posted at 10-2 22:55
Ship it back to DJI then for a proper diagnostic evaluation.

That's what I will propably do.

Teen Mike Posted at 10-3 20:40
That's what I will propably do.