Please select Into the mobile phone version | Continue to access the computer ver.
Mavic Air 2 Calibration Error
2695 7 2020-10-2
Uploading and Loding Picture ...(0/1)
o(^-^)o
Pabsman
lvl.1
Flight distance : 367 ft
Bolivia
Offline

So I tried to do a Sensor calibration on my laptop and I got this error.

error.png


Calculation Error. Recalibrate now. 2-2 eul_x(-6.21-0.005-0.00).
I tried calibrating wiith a 14 in screen 1360x768 resolution.

Can someone help me with this?
Thanks.



2020-10-2
Use props
Suren
Captain
Flight distance : 11886286 ft
  • >>>
New Zealand
Offline

When I did mine I connected the laptop to my TV and it worked. was having issues with laptop screen
2020-10-2
Use props
Pabsman
lvl.1
Flight distance : 367 ft
Bolivia
Offline

Suren Posted at 10-2 11:17
When I did mine I connected the laptop to my TV and it worked. was having issues with laptop screen

I tried connecting it with an HDMI cable but I got a size screen error.
2020-10-2
Use props
Suren
Captain
Flight distance : 11886286 ft
  • >>>
New Zealand
Offline

Pabsman Posted at 10-2 12:25
I tried connecting it with an HDMI cable but I got a size screen error.

Not sure then
2020-10-3
Use props
kiminx
First Officer
Flight distance : 125430 ft
Offline

2 times i calibrated and ok. Using 14" notebook screen. Just direct your ma2 sensor camera and move follow the squarel.
2020-10-3
Use props
frankymusik
Captain
Flight distance : 27262490 ft
  • >>>
Germany
Offline

You have to pay close attention to the displayed boundaries (corners) and do it very carefully.
"Hold" the MA2 nicely in the middle in front of the screen and carry out the movements for following the displayed area on the screen only by slightly "tilting" the MA2 ...

At first I didn't have any success ...
... but "practice makes perfect".

2020-10-3
Use props
Vendex
First Officer
Flight distance : 15994042 ft
  • >>>
Bulgaria
Offline

Hello, Mavic Air 2 now using auto calibration, no need for manual. Do it manual only if auto calibration fails.
2020-10-3
Use props
DJI Stephen
Super Moderator
Offline

Hello there Pabsman. I am sorry to know that you are having issues with the sensors of your DJI Mavic Air 2 and thank you for reaching out. Please try to calibrate the said drone using a monitor display of 14 inches or bigger is recommended for the calibration. Please set the display’s resolution to the recommended default value. ( Usually, the 14-inch display’s resolution should be set at 1366*768 or 1440*900. The 17-inch display’s resolution: 1366*768 or 1280*720. The 19-inch display’s resolution: 1366*768 or 1440*900. The 22-inch display’s resolution: 1680*1050 or 1920*1080. The 24-inch display’s resolution: 1920*1080 or 1920*1200.) . Thank you.
2020-10-4
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules