Please select Into the mobile phone version | Continue to access the computer ver.
Firmware v1.2.6 taking very long time to install
906 5 2015-6-24
Uploading and Loding Picture ...(0/1)
o(^-^)o
Merle Robillard
lvl.2
Flight distance : 69918 ft
Canada
Offline

My P3 has been installing the update for well over an hour and a half now. Is this normal? Has anyone else had this happen? I'm afraid it's going to deplete the battery before it's finished... Someone please tell me to be patient as theirs also took forever
2015-6-24
Use props
sinbad_uk
lvl.4
Flight distance : 117343 ft
United Kingdom
Offline

No it is not normal, if it was mine I would switch it off and check the txt file for the result and probably charge the battery, re download the FW and try again. Think mine took 15 minutes. Make sure you have downloaded the correct version.
2015-6-24
Use props
Merle Robillard
lvl.2
Flight distance : 69918 ft
Canada
Offline

Yikes, seems like a scary proposition to stop it mid-install. The battery is charged and I did put in the right version...
2015-6-24
Use props
Merle Robillard
lvl.2
Flight distance : 69918 ft
Canada
Offline

Despite it never stopping, it says it installed correctly...


========== 2014.01.01 00:00:12 unsynchronized ======
Packet: P3X_FW_V01.02.0006.bin
Upgrading ...
Result: Success.
2015-6-24
Use props
sinbad_uk
lvl.4
Flight distance : 117343 ft
United Kingdom
Offline

Make sure you recalibrate everything, sticks/gimble wheel too!
2015-6-24
Use props
jimcloud74
Second Officer
Flight distance : 1298317 ft
United States
Offline

Merle Robillard Posted at 2015-6-25 04:12
Despite it never stopping, it says it installed correctly...

Welcome to the "it might work" or "it might not work" firmware club.
2015-6-24
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules