Hi Everyone. I’m just getting a blank screen when using the raveneye on the rs2 with the gh5s. The setup is working fine with the blackmagic6k. I’m not getting any errors, just the raveneye interface and black screen.

So i'm doing more testing and i've found that it works fine when shooting in 1080p but once i switch to 4k screen goes blank. Since the screen is working fine on the bmpcc6k i think the issue is specifically between the raveneye and the gh5s. DJi please work a firmware fix. Thanks.

I'm testing the raveneye with the gh5s and it only works in 1080 mode but in 4k the screen just goes blank.

the raveneye is a 1080 device !

Choose a 4k camera recording mode.
Go to HDMI Rec Output in the GH5 menu and select to down convert the signal to 1080p.
So, you'll see the 1080p through the Raven Eye but record 4k in your card.

fans231f5952 Posted at 2020-12-23 04:43
Choose a 4k camera recording mode.
Go to HDMI Rec Output in the GH5 menu and select to down convert the signal to 1080p.
So, you'll see the 1080p through the Raven Eye but record 4k in your card.

This is helpful, but I have a doubt, what would be your workarround to use raven eye, and my external monitor atomos ninja, and record 4k on the ninja?