Please select Into the mobile phone version | Continue to access the computer ver.
DJI Pilot Mapping mission Pause and resume
1201 2 2020-11-2
Uploading and Loding Picture ...(0/1)
o(^-^)o
apuzer
lvl.2

United States
Offline

Good Afternoon,

We have a M300RTK and when flying a mission, we often need to hot swap the batteries. We pause the mission, return to home, and swap the batteries one at a time while leaving drone on ....waiting at least 3 seconds between swapping each battery. We get an error on the Smart Controller screen that says "Map Interactions should happen on the UI thread. Method invoked from wrong thread is Removeannotationicon." whatever that means. We are literally just pressing the blue circle with the arrow inside. Any wisdom to successfully pause, hot swap, and resume a mission seamlessly?



2020-11-2
Use props
TheLensAloft
lvl.2
Flight distance : 34865 ft
United States
Offline

Go to the 3 dot menu in the upper right corner, scroll down to the next 3 dot button. Click on it then scroll down to map switch. Change it to amap. It will let you resume the mission. You can change it back to mapbox at any time to get your map back on the screen after takeoff.
1-13 10:38
Use props
mcekirge
lvl.1
Flight distance : 509357 ft
Turkey
Offline

what a stupid solution is this?
1-24 05:21
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules