miamigo Posted at 11-10 07:42
You can turn off autoupdate.

Yes, I've found this option. Only to stay alert for a better update than 1.2.0.

Not good since i upgraded to the mini 2 from the mavic mini, first upgraded to 1.2.0 and now as soon as i start the propellers the screen has a green tint on phone and tablet, anyone else had this? the phone and tablet worked fine with the mavic mini 1 and older version of the fly app. Not a good start with a new drone. I've tried uninstalling and reinstalling the app.

I can confirm that weak signal warning appeared at some point and stayed on until the end, even though I basically touched the drone with the controller after landing to check if it would go away. On the next flight I even had to restart the drone and the controller a couple of times to get them to connect. DJI Fly 1.1.10 works fine though.

No worries anymore, coming to Mini 3.

Ralle Posted at 11-11 01:21
No worries anymore, coming to Mini 3.[view_image]

I miss my Spark

Ralle Posted at 11-11 01:21
No worries anymore, coming to Mini 3.[view_image]

HaHaHa

Hi, i also get a "Weak Signal Message Code 80016" during flight with Fly App 1.2.0 and Mavic Mini. The message do not disappear although the signal is strong until end of flight . Whats ist wrong with the app? what can i do?

CopterTamer Posted at 11-11 08:33
Hi, i also get a "Weak Signal Message Code 80016" during flight with Fly App 1.2.0 and Mavic Mini. The message do not disappear although the signal is strong until end of flight . Whats ist wrong with the app? what can i do?

As already said 1000 times , downgrade the app and turn off the app autoupdate. I never do an update if nothing relevant to Mini 1 has been changed (why ?). If only "Fixes app crashing issues and improves overall stability." is specified in the changes, I don't care because I have no issues or stability problems. The last useful update for the Mini 1 was version 1.1.8 (battery indicator).

Hello, I have a Mavic Air 2 and after updating the application to version 1.2.0 or PHOTO mode, it keeps locking up constantly and with a lot of delay on my Android screen? Do you also notice this problem?

mini2Paul Posted at 11-10 11:56
Not good since i upgraded to the mini 2 from the mavic mini, first upgraded to 1.2.0 and now as soon as i start the propellers the screen has a green tint on phone and tablet, anyone else had this? the phone and tablet worked fine with the mavic mini 1 and older version of the fly app. Not a good start with a new drone. I've tried uninstalling and reinstalling the app.

In my case solution of this "green screen" was reboot drone and phone. It is not working if about freezing warnings...

Glad I didn't update this time!  

But I hope it gets fixed soon.

reguza64 Posted at 11-7 21:18
This for android only, I dont have iphone sorry.
You can use this link https://www.apkmirror.com/apk/dji-technology-co-ltd/dji-fly/
and select the version you need

Thanks for the Link.
Waited all week hoping that DJI would issue a further update.
Alas that's not happened, so used your link and have downgraded to 1.1.10, downloaded the latest one.
Thanks for posting, much appreciated

mini2Paul Posted at 11-10 11:56
Not good since i upgraded to the mini 2 from the mavic mini, first upgraded to 1.2.0 and now as soon as i start the propellers the screen has a green tint on phone and tablet, anyone else had this? the phone and tablet worked fine with the mavic mini 1 and older version of the fly app. Not a good start with a new drone. I've tried uninstalling and reinstalling the app.

I would go to the Mini 2 forum, because the users there mostly have the Mini 2! I have one but have not flown for a few days.

Hey,

had the same problem when I was on a once in a lifetime experience.
Tried everything, unplugging and plugging in the cable of my phone worked, but every other 5 minutes I would get disconnected again...

Hi,
Update V1.2.1 is out here in France this morning for IOS and tells that is fixes the issue on MM about the popup message.
not able to test for the moment.

Just updated to 1.2.1and tested. It seems everything ok now so you can update to 1.2.1




Cheers

RePrEsEnT Posted at 11-13 03:10
Just updated to 1.2.1and tested. It seems everything ok now so you can update to 1.2.1

[view_image]

Good to know - lovely shots BTW

RePrEsEnT Posted at 11-13 03:10
Just updated to 1.2.1and tested. It seems everything ok now so you can update to 1.2.1

[view_image]

Good to know!

Still waiting to show up in GooglePlay for the Netherlands.

1.2.0 ; still no battery cell values in the txt to cvs conversion, and in the DAT file more data is missing.
Is DJI changing this because not only DJI is analyzing data....

cheers
JJB

Hey
As i know was 2 updates of RC in Nov
Can somebody tell me:
1. The ver of RC before update comming ( this stable one)
2. Can I safety fly with 1.1.10 ver of DJI Fly  for Android and current ver of RC 1101 ? (MA2 is not updated to new sw)
3. How to roll back the RC to stable ver ?

Thanks in advance.

pagi_pl Posted at 11-13 14:04
Hey
As i know was 2 updates of RC in Nov
Can somebody tell me:

Androide:
1) 1.2.0 - Now 1.2.1
2) Yes!
3) Remove app. Install from this link:
https://www.apkmirror.com/apk/dji-technology-co-ltd/dji-fly/

miamigo Posted at 11-13 22:17
Androide:
1) 1.2.0 - Now 1.2.1
2) Yes!

Hi. Thanks. Im asking about remote control not phone.

JJB* Posted at 11-13 09:17
Good to know!

Still waiting to show up in GooglePlay for the Netherlands.

There are two versions of 1.2.1, 896 and 898 for googleplay, mine updated to 898 yesterday...

virtual Posted at 11-14 02:09
There are two versions of 1.2.1, 896 and 898 for googleplay, mine updated to 898 yesterday...

Where do I see the 896 or 898 after I have updated to V1.2.1 ?
In the Fly App under About, or where can I find this three digits 896/898 ?

Hello JJB! Have you tested Fly 1.2.1 ?

With the Mini?...

Cients Posted at 11-14 16:39
Hello JJB! Have you tested Fly 1.2.1 ?

Not yet, updated one of  my devices to 1.2.1.
Mayby test today, or tomorrow.

MavicMats Posted at 11-14 15:42
Where do I see the 896 or 898 after I have updated to V1.2.1 ?
In the Fly App under About, or where can I find this three digits 896/898 ?

From DJIFly app go to Profile - Settings - scroll down on the left part at very bottom

MavicMats Posted at 11-14 15:42
Where do I see the 896 or 898 after I have updated to V1.2.1 ?
In the Fly App under About, or where can I find this three digits 896/898 ?

I guess in profile/settings all the way down.

EDIT: spanzetta was faster...;-)

spanzetta Posted at 11-15 02:39
From DJIFly app go to Profile - Settings - scroll down on the left part at very bottom

Thank you Spanzetta for info.
I have never see this section in the app before, but now I find it.
I downgrade from V1.2.1 to V1.1.9 (851) on my Mavic Mini and it fly very good now.

Thank's again !

virtual Posted at 11-15 04:47
I guess in profile/settings all the way down.

EDIT: spanzetta was faster...;-)

Thank's Virtual for your kindness !

Sean-newbie Posted at 11-6 13:17
Hmmmm I had a clean install of fly 1.2.0 on a reset Android phone and had the would-not-clear weak signal thing too (Mavic Mini) along a full reboot of the phone occurring.

What's the process for installing an earlier version as per post #2?

You can roll it back from this site

gort Posted at 11-15 08:09
You can roll it back from this site

.........Thanks........

Same problem... 10 meter from controller

I'd go back even further to a more stable 1.1.8

djiuser_NuaHFRbPjllK Posted at 11-7 09:48
Hi, be really grateful if you could explain
how I revert back to 1.1.10

This might help iphone users...
https://www.youtube.com/watch?v=iQItHZMB4tc&t=74s

Ralle Posted at 11-11 01:21
No worries anymore, coming to Mini 3.[view_image]

JJB* Posted at 11-15 02:08
Not yet, updated one of  my devices to 1.2.1.
Mayby test today, or tomorrow.

Have you had the opportunity to test 1.2.1 app?
Is it better?

Cients Posted at 11-20 15:25
Have you had the opportunity to test 1.2.1 app?
Is it better?

yes  i have tested it on my MM and MA2.

No disconnects, lag on video etc.  
But need to fly more to get a better feel about 1.2.1.

cheers
JJB

JJB* Posted at 11-21 01:32
yes  i have tested it on my MM and MA2.

No disconnects, lag on video etc.  

Thank you very much!
I just flew the MM from my rooftop and had no problems.
Have a nice weekend!