Hi. A7SIII with Raveneye and Focus Motor Wheel which both work great when I have the Sigma 24-70 attached.
I've taken the motor off, an put a prime ON (24mm f1.4 GM) and tried to use the front dial to control the Digital Zoom of the camera but am unable. Any tips anyone?

I've tried with Raveneye connected and disconnected, both with no luck.

..that should work - control your setting in your A7S III if you have clear image zoom selected (page 11 in the menu  - and on the gimbal control, if the wheel function is set to focus

abase21 Posted at 11-19 01:23
..that should work - control your setting in your A7S III if you have clear image zoom selected (page 11 in the menu  - and on the gimbal control, if the wheel function is set to focus

Thank you very much for your help. That's all squared away, so I guess I'll try the old trusted "unplug, everything, replug it all. Turn RS2 on FIRST then camera", see if that resolves it all