Please select Into the mobile phone version | Continue to access the computer ver.
OSDK4.x: DJI Assistant 2 for Matrice with gimbal/camera control
48 1 11-17 00:42
Uploading and Loding Picture ...(0/1)
o(^-^)o
NickAnderson019
lvl.1

South Africa
Offline

Is it possible with OSDK4.x to command gimbal/camera actions and use the DJI Assistant 2 for Matrice concurrently?

Previously, we have been using the M210V1 with OSDK3.9. Using the DJI  Assistant 2 for Matrice to simulate the drone flight is key to our  ability to develop our system.

However, the M210V2 and OSDK4.x require the USB port of the drone to  be connected to the Linux device running the OSDK, otherwise any payload  (GimbalManager, CameraManager) actions throw an error. An exmaple action would be GimbalManager::resetSync.

This is not ideal for development since we cannot use the simulator  (DJI Assistant 2 for Matriceon MacOS) and connect the USB to the Linux device (there is only one  USB port on the drone). Are there any workarounds to this problem?

11-17 00:42
Use props
kv886
Second Officer

South Africa
Offline

This is the official solution https://developer.dji.com/onboar ... tart/attention.html
11-24 00:50
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules