Please select Into the mobile phone version | Continue to access the computer ver.
DJI Ronin 2 Release Notes (25/11/2020)
874 4 2020-11-25
Uploading and Loding Picture ...(0/1)
o(^-^)o
DJI Support
DJI team
Flight distance : 2408 ft

South Africa
Offline

Overview:
  • Date : 2020.11.25
  • Gimbal Firmware : v1.7.1.0
  • Remote Controller Firmware: v1.4.0.30
  • DJI Ronin App iOS : v1.4.4
  • DJI Ronin App Android : v1.4.4
  • DJI Pro Assistant for Ronin (PC) : v2.0.2
  • DJI Pro Assistant for Ronin (Mac): v2.0.2
  • User Manual : v1.2

What’s New?
  • Fixed issue: some batteries displayed the battery level incorrectly and dropped suddenly. If there are several batteries, update the firmware for all the batteries one by one.

Notes:
  • Update the firmware through DJI Pro Assistant for Ronin by connecting the USB-C port on Ronin 2 to your computer. Do not disconnect the gimbal from the computer while updating.
  • Make sure to update both the gimbal and remote controller of Ronin 2 to the latest firmware. Otherwise, the remote controller will not be able to control the gimbal. Restart the gimbal and remote controller after the update is complete.
  • Once the update starts, the motors power off. If updating firmware with a camera attached to Ronin 2, make sure to protect the camera from collisions.
  • If the firmware update fails, restart Ronin 2 and retry.


2020-11-25
Use props
Montfrooij
Captain
Flight distance : 1934915 ft
Netherlands
Online

Thanks for the info!
2020-11-26
Use props
fanse69caee5
lvl.1
Flight distance : 177438 ft

Canada
Offline

ohhhhhhh!
2020-12-10
Use props
gatesgodman
Ban Posts

Cameroon
Offline

Tip: the author has been banned or deleted automatically shield
2020-12-21
Use props
YVRoninUser
lvl.1

Canada
Offline

Hello Support,

Having completed the firmware update, my version on the Ronin 2 gimbal shows as 1.1.0.11, rather than the 1.7.1.0 I'd expect.  This wasn't resolved on multiple attempts, downgrading and reinstalling, reinstalling the DJI PC software, etc.  I asked my dealer to try the update as well, and they report the same issue.

More troubling is that the Push Pan and Push Tilt complaints that were supposedly resolved in 1.5.08 are still very apparent.  As soon as Push Pan is engaged, the pan motor makes noise on quicker pans and also has jerky response.  Again, my DJI dealer tested the issue and found the same problem.

Push pan and tilt are extraordinarily useful, and are a major selling point, and I use them for every shot on a ReadyRig or Klassen SlingShot.  They worked flawlessly with the last firmware I was using.  The only reason I have updated the firmware is for Master Wheels compatibility.

Please advise!
1-15 22:31
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules