Please consider allowing the pilot to set RTH lower than the minimum on the DJI Mavic Air2/ DJI Mini 2.

Warning - Feature for experianced pilots only.

To be used in this example and other related uses:
When returning from a distant flight, the pilot may want to skim the ground after seeing what is out there.
Allow the pilot to change the RTH to 10ft (3m) to accomplish this.
Also, when RTH altitude is set to this new minimum, set an on screen warning "Warning - RTH altitude is set below recommended 100ft (30m)" so the pilot will not forget to change it back.


Reasoning:
I tried to lower my aircraft for this return flight but it continued to raise to RTH height:

The video would have been even more incredible if I could have lowered to 10ft (3m)

Thats cool looking footage

Awesome footage mate and good suggestion

Amazing, thank you!

Good suggestion!

BTW, nice video!

Hello there pmshop. Thank you for reaching out and for sharing these information you have shared with us and for posting this wonderful video you have filmed. I will cascade and forward this thread to the designated DJI department for further attention. All significant suggestions or requests will be implemented after the evaluation of the DJI Engineers. For the latest updates on DJI, please stay tuned to our DJI official website at www.dji.com. Thank you and please stay safe always.

You may be able to do this with Drone Hacks application...

The g_config.go_home.fixed_go_home_altitude parameter?

*use at your own risk

kbrosni Posted at 12-1 20:28
You may be able to do this with Drone Hacks application...

The g_config.go_home.fixed_go_home_altitude parameter?

Only goes down to 42ft I need 3m or 10ft