Building a dream home complete

Montfrooij · 2020-12-19

Finally, 1 year, 70Gb of data

Now it is just a waiting game untill they start with the garage

Montfrooij · 2020-12-19

Blériot53 · 2020-12-19

It's been a long haul but I'm sure the owners will think it well worth the wait.

DowntownRDB · 2020-12-19

Magnificent job of selecting this footage from 70 GB of data. You are a patient and dedicated individual. Turned out to be a beautiful home.

Montfrooij · 2020-12-19

Blériot53 Posted at 12-19 10:53
It's been a long haul but I'm sure the owners will think it well worth the wait.

Most certainly!

Montfrooij · 2020-12-19

DowntownRDB Posted at 12-19 11:48
Magnificent job of selecting this footage from 70 GB of data. You are a patient and dedicated individual. Turned out to be a beautiful home.

Thanks a lot!
Finally one project done!
(sort off)
Now I can clean up my HD

Depp · 2020-12-19

Very nice! By far the best one. Here's an idea for the next time if you have the right equipment: Program a scene, fly it every time and then cut seamlessly in one motion through the different stages. Saw that once and it was a really cool effect.

DAFlys · 2020-12-20

Interesting to see it out of order.

Montfrooij · 2020-12-20

Depp Posted at 12-19 23:29
Very nice! By far the best one. Here's an idea for the next time if you have the right equipment: Program a scene, fly it every time and then cut seamlessly in one motion through the different stages. Saw that once and it was a really cool effect.

Thanks!
I wanted to, but I assumed we were not allowed to do this in NL (autonomous flying)
But I found out some months ago we are.
Next time ;)
Oh wait, I have a M2, that does not have waypoints
Now I have to wait for Litchi to support this and buy that

Montfrooij · 2020-12-20

DAFlys Posted at 12-20 01:04
Interesting to see it out of order.

Thanks David.
It was the last of that footage .
Now I'm quite done with it

Until they start with the garage that is!

DAFlys · 2020-12-20

Montfrooij Posted at 12-20 03:12
Thanks David.
It was the last of that footage .
Now I'm quite done with it

lol, Id really like to be able to do timelapse shots like this over many months and then combine them into some footage, Im hoping Litchi will be accurate enough to do it, if I allow a bit of space for cropping.

Montfrooij · 2020-12-20

DAFlys Posted at 12-20 03:14
lol, Id really like to be able to do timelapse shots like this over many months and then combine them into some footage, Im hoping Litchi will be accurate enough to do it, if I allow a bit of space for cropping.

It is close to impossible.
I tried it with a ground camera on a tripod.
But the slightest change in direction / orientation leads to misaligned frames because of perspective effects.
Especially with wider lenses.
Unless there is some AI software that magically can transform the frames to match them.
(which I don't know about, I have searched a lot, because I have 5 projects waiting for this magic to happen)

QQRUCH · 2020-12-20

congratulations! It was a great job! Thanks for sharing Monty!

Montfrooij · 2020-12-20

QQRUCH Posted at 12-20 03:59
congratulations! It was a great job! Thanks for sharing Monty!

Thanks man.
Finally time to move on

DAFlys · 2020-12-20

Montfrooij Posted at 12-20 03:35
It is close to impossible.
I tried it with a ground camera on a tripod.
But the slightest change in direction / orientation leads to misaligned frames because of perspective effects.

I was wondering if the stabilise feature in FCP for Premier would be able to do that by cropping the shots.

DowntownRDB · 2020-12-20

Montfrooij Posted at 12-19 12:28
Thanks a lot!
Finally one project done!
(sort off)

My pleasure!

I got tired of cleaning hard drives to make more room so I bought a 14TB one. Needed something big for CAD files, etc. Don't think I'll ever fill this one up.

However, it is always nice to get rid of files, etc that you don't ever plan on using again.

Montfrooij · 2020-12-20

DAFlys Posted at 12-20 06:25
I was wondering if the stabilise feature in FCP for Premier would be able to do that by cropping the shots.

If so, that would be a reason for me to try it out!

Montfrooij · 2020-12-20

DowntownRDB Posted at 12-20 07:30
My pleasure! I got tired of cleaning hard drives to make more room so I bought a 14TB one. Needed something big for CAD files, etc. Don't think I'll ever fill this one up.

However, it is always nice to get rid of files, etc that you don't ever plan on using again.

That is one way to battle it!
Make sure you get two.
They tend to break down after some years!

I think I might investigate this option.
Sometimes I would like to have old footage for projects.

Thanks!

QQRUCH · 2020-12-21

Montfrooij Posted at 12-20 04:15
Thanks man.
Finally time to move on

you're always welcome!

Montfrooij · 2020-12-21

QQRUCH Posted at 12-21 02:33
you're always welcome!

DowntownRDB · 2020-12-21

Montfrooij Posted at 12-20 09:20
That is one way to battle it!
Make sure you get two.
They tend to break down after some years!

I do have a 2nd 14TB drive and have backed up the 1st drive....just in case. They are still a bit expensive but the price is coming down and it sure beats having 4 or 5 smaller back up drives and trying to figure out what is on each.

Montfrooij · 2020-12-21

DowntownRDB Posted at 12-21 07:03
I do have a 2nd 14TB drive and have backed up the 1st drive....just in case. They are still a bit expensive but the price is coming down and it sure beats having 4 or 5 smaller back up drives and trying to figure out what is on each.

I find them a bit too pricey.
So I deleted the files.
I have 2x 4 Gb, so if there is something special, I will store it on those.
Just waiting for a good discount

DowntownRDB · 2020-12-22

Montfrooij Posted at 12-21 09:10
I find them a bit too pricey.
So I deleted the files.
I have 2x 4 Gb, so if there is something special, I will store it on those.

I figure in another 4-6 months the price will drop considerably. 14TB is really overkill but I had the funds and took the plunge. If it wasn't for all my large CAD drawings I would have settled for 5-6TB drive.

Montfrooij · 2020-12-22

DowntownRDB Posted at 12-22 08:18
I figure in another 4-6 months the price will drop considerably. 14TB is really overkill but I had the funds and took the plunge. If it wasn't for all my large CAD drawings I would have settled for 5-6TB drive.

8Tb is priced 'ok', but I will wait for a good discount since I need 2

DowntownRDB · 2020-12-23

Montfrooij Posted at 12-22 10:06
8Tb is priced 'ok', but I will wait for a good discount since I need 2

Great plan. Here's hoping the prices continue to drop.

Montfrooij · 2020-12-23

DowntownRDB Posted at 12-23 06:40
Great plan. Here's hoping the prices continue to drop.

They will.
Maybe some Christmas sales