fans48abce45
lvl.3
Flight distance : 4284826 ft
Hong Kong
Offline
|
Hello all, I have the same issue 2 months ago and I sent my RSC2 for after sale service, they repaired the joystick for free but the issue happened again at 2 weeks before. Since this is the peak season for my works and I can't send the gimbal to DJI again, I fixed it myself temporarily and hope that it can help you guys for the drifting problem.
First, use the Ronin app to check the joystick readings, if the joystick is centered all channels should be in 0 value, for mine the channel 3 (yaw axis) is holding at -76 when it's in neutral position, so that my gimbal always drift to the left side, and during the joystick is panning, it will disables the follow mode on tilt axis, and makes the gimbal unusable.
Go to the gimbal setting page, find the deadband at the yaw axis (or the axis that drifting), then set it to a higher value. For mine I set it to 50 which means I have to move the joystick to a higher angle, and then the joystick will start moving, so that it won't move if it's in a lower angle, and fixed the auto drifting problem.
If the deadband fix is not work, disable the drifting axis will do the same.
|
|