Please select Into the mobile phone version | Continue to access the computer ver.
When RTK is opened,M300RTK cann't fly!
96 2 2020-12-24
Uploading and Loding Picture ...(0/1)
o(^-^)o
djiuser_kIFd1YLbS2Ke
lvl.1

China
Offline

When RTK is Open, and trying to
[[DJISDKManager missionControl].waypointV2MissionOperator startMissionWithCompletion:^(NSError * _Nullable error) {}]
It always tell that "The aircraft home point is not recorded yet"
But when I open the Rtk through RC, RC told me that home location is updated.
How to make waypointV2Mission work normally when RTK is opened?
MY firmware and sdk are all the latest.

2020-12-24
Use props
想养一条边牧
lvl.3
Flight distance : 1155 ft
South Africa
Offline

As I know that if enable and test the WP in the simulator will cause this problem. Are you using the simulator?
2020-12-31
Use props
djiuser_kIFd1YLbS2Ke
lvl.1

China
Offline

想养一条边牧 Posted at 12-31 01:16
As I know that if enable and test the WP in the simulator will cause this problem. Are you using the simulator?

I also test outside, and the same result (When rtk is opened, it shows home point not recorded).
2020-12-31
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules