Please select Into the mobile phone version | Continue to access the computer ver.
Raveneye
362 8 1-1 11:57
Uploading and Loding Picture ...(0/1)
o(^-^)o
Andy68
lvl.2
Germany
Offline

Hi,

is there a method to reboot/restart the device  raveneye  (brand new) because I get no WIFI signal. (and therefore of course no connection with the app). I pused the power button 15sec  (I read  this in the forum) and now the 3 white LED are blinking. 1x long 1x short and again. The power LED is just red.

When I try to switch of the raveneye the power LED switch off and the white LED still blinking.




Thanks for help


Andreas


1-1 11:57
Use props
djiuser_6ElQ5LJ78Cjm
lvl.1

United States
Offline

I have the same problem. It won't even turn off unless I hold down the power button for 15 seconds with NO cables connected.

The second I connect a USB C to the charging port I get the flashing RED and WHITE LEDs.
1-4 15:31
Use props
Giulian76
lvl.2
Flight distance : 1886608 ft
Italy
Offline

Hello guys, maybe this can help!




1-4 15:51
Use props
Andy68
lvl.2
Germany
Offline

Hi Giulian,
as far as I understand the 2.5GHz was switched to 5 GHz. Your solutions will be to buy I dongle to fix the problem. I hope there is some other way to solve this.
But anyhow, it was a big step to understand the problem.

1-5 14:40
Use props
Giulian76
lvl.2
Flight distance : 1886608 ft
Italy
Offline

Andy68 Posted at 1-5 14:40
Hi Giulian,
as far as I understand the 2.5GHz was switched to 5 GHz. Your solutions will be to buy I dongle to fix the problem. I hope there is some other way to solve this.
But anyhow, it was a big step to understand the problem.

Hi!! Yes you are correct! I had to spend 8 dollars for a wifi dongle to recover a "problem" not caused by me. Anyways it will mean that this wifi dongle will be good for something else too.
1-5 15:21
Use props
Andy68
lvl.2
Germany
Offline

Giulian76 Posted at 1-5 15:21
Hi!! Yes you are correct! I had to spend 8 dollars for a wifi dongle to recover a "problem" not caused by me. Anyways it will mean that this wifi dongle will be good for something else too.

the solution with the dongle will be my final solution: I tried it with a I-Pad and found the 5GHz net from the raveneye but the app on the I-Pad alwas ask me to allow the access to the location-sharing (it is open for all apps) so I stuck with this way.
I tried to intall the bluestacks but I need to update my operating system and I don't like this because all other programms are running well and I don't want to create some new problems.
1-6 12:41
Use props
Giuliano Albertelli
lvl.1

Italy
Offline

Andy68 Posted at 1-6 12:41
the solution with the dongle will be my final solution: I tried it with a I-Pad and found the 5GHz net from the raveneye but the app on the I-Pad alwas ask me to allow the access to the location-sharing (it is open for all apps) so I stuck with this way.
I tried to intall the bluestacks but I need to update my operating system and I don't like this because all other programms are running well and I don't want to create some new problems.

When I open the Ronin app, it always asks me to activate it too, so I always click yes and a window opens where it makes me activate the GPS. then  the Ronin app opens
1-6 15:00
Use props
Andy68
lvl.2
Germany
Offline

Giuliano Albertelli Posted at 1-6 15:00
When I open the Ronin app, it always asks me to activate it too, so I always click yes and a window opens where it makes me activate the GPS. then  the Ronin app opens

the window is openning and I klick GPS for everyone, go back to the app and nothing happens. Than I klick   connect to RavenEye and it happens again.
It is somehow frustrating because there was no support from DJI and I waste now many hours on this project.
1-7 13:35
Use props
Andy68
lvl.2
Germany
Offline

Giuliano Albertelli Posted at 1-6 15:00
When I open the Ronin app, it always asks me to activate it too, so I always click yes and a window opens where it makes me activate the GPS. then  the Ronin app opens

Hi Giuliano,
I'd like to keep you updated about my problem with the raveneye because you gave me the hint with the 5 /2.4 GHz
I had to sent the whole combo set back and got a new one (to change  only the raveneye was impossible). The new raveneye was working like expected, the only thing what I had to do is change the frequence from 5 to 2.4. In my case I borrowed an I-Phone and than it was done in less than 5min. Next step was to think about a phone which can use both frequences (I never know if the raveneye suddenly change the frequence) . Now I can start to work with my new tool and check out the possibilities. 10 weeks to have a product that is working like they show it in the brochure.


Regards
Andy
2-9 12:42
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules