Please select Into the mobile phone version | Continue to access the computer ver.
Who has the 1.1.8 Advanced file
18494 234 2015-7-2
Uploading and Loding Picture ...(0/1)
o(^-^)o
Deluxor
lvl.2

Portugal
Offline

hello friend, could you please send me the file for phantom 3 pro? mine is sitting down for weeks now, i would like to revert to latest good firmware or at least reflash to make surr every component was updated.
email: du (at) rte.pm
Thank you anyway.
2015-7-18
Use props
info.u3ds
lvl.1

Netherlands
Offline

Hello robrogkr.
Please can you sent me the file for the Phantom 3 pro. I have problems with VPS and v1.26

Thanks in advance !
2015-7-21
Use props
1320frank
lvl.3
Flight distance : 2624856 ft
United States
Offline

robrogkr Posted at 2015-7-13 05:05
I have not tested it on P3P. But it was tested by Pahtet2001. His post you can find a couple of po ...

robrogkr ,
I would be grateful if you could email the bin file to 1320frank at comcast.net as I have not been able to fly since June 26th. In advance Thanks!
2015-7-22
Use props
johnmaetta
lvl.2

United States
Offline

robrogkr

Please forward me the service bin file at johnmaetta@comcast.net

Thank you.
2015-7-22
Use props
skydancer11
lvl.2

Israel
Offline

Hi robogkr,
Please send me the bin file to skydancer11@gmail.com  
Thanks
2015-7-22
Use props
robotertest
lvl.2
Germany
Offline

skydancer11 Posted at 2015-7-23 03:58
Hi robogkr,
Please send me the bin file to   
Thanks

Hello robrogkr.
Please can you sent me the file for the Phantom 3 Pro. I want to rollback to 1.1.8
email :  robotertest (at) gmail dot com  Thanks in advance !
2015-7-23
Use props
1320frank
lvl.3
Flight distance : 2624856 ft
United States
Offline

1320frank@comca Posted at 2015-7-23 02:24
robrogkr ,
I would be grateful if you could email the bin file to 1320frank at comcast.net as I h ...

DOES anyone else have the bin file for this? Seems robrogkr is not responding to us.

If you have a copy would you please share it? Send it to 1320frank at comcast.net Thank you!
2015-7-23
Use props
fernandogamboav
lvl.1

Mexico
Offline

Hi robrogkr,

Can you please send me the file to fernandogamboav@hotmail.com I have a P3p

Thanks

Saludos desde México
2015-7-23
Use props
bbmak
lvl.2
Flight distance : 125476 ft
Germany
Offline

pls forward me the file to bbmak@arcor.de

many thanks
2015-7-24
Use props
cegio
lvl.4
Flight distance : 671257 ft
  • >>>
Spain
Offline

He sent me the file last week, I have many friends with p3a who need to roll back to 1.9 , I´ll tell you something soon.
2015-7-24
Use props
epsilon1966
lvl.1

United States
Offline

Hello
I have a p3p and would like the service bin file so that I can restore the last working firmware   I have copies of the last two. But I need the service bin file to delete the current firmware
Thanks to anyone who can help :-)
2015-7-25
Use props
fernandogamboav
lvl.1

Mexico
Offline

Today I have received the file, will test it later
2015-7-25
Use props
info.u3ds
lvl.1

Netherlands
Offline

Ok, I received the file today.
Downgraded the v1.26 file from my P3P , to v1.19 with SUCCES !

I 'll test flight performance and VPS tomorrow, today it's very stormy in Holland ;-)

I have VPS issues with v1.26, therefore  I'am very grateful to Robert, cause he did a great job !

Thanx again bro
2015-7-25
Use props
johnmaetta
lvl.2

United States
Offline

Four of you pilots have stated that you were successful in downgrading to 1.1.9. You also said you would fly and report back the results.
So far its been more than a week and no results have been posted. The flyers are:

dangtrungy
info.u3ds
drswearingen
SPITHAS

Wheres your results????
2015-7-25
Use props
robrogkr
lvl.2
Flight distance : 293976 ft
Poland
Offline

johnmaetta@comc Posted at 2015-7-26 02:56
Four of you pilots have stated that you were successful in downgrading to 1.1.9. You also said you w ...


I confirm that each of those persons ( and others) has promised to introduce the report here.
But often people who once receive what they want, don’t remember what they promised :-( .

PS.  info.u3ds was not able to do fly test yet
2015-7-25
Use props
johnmaetta
lvl.2

United States
Offline

robrogkr Posted at 2015-7-26 03:10
I confirm that each of those persons ( and others) has promised to introduce the report here.
But ...


Thank you for the .bin file.

I enjoyed the video too.  Have you successfully downgraded from 1.2.8 to 1.1.8 without downgrading to 1.1.9 first?

2015-7-25
Use props
robrogkr
lvl.2
Flight distance : 293976 ft
Poland
Offline

johnmaetta@comc Posted at 2015-7-26 03:30
Thank you for the .bin file.

I enjoyed the video too.  Have you successfully downgraded from 1.2 ...


No I have not, only after 1.1.9 in next step
2015-7-25
Use props
johnmaetta
lvl.2

United States
Offline

So, here are the steps:

1. Install your .bin
2. Install 1.1.9
3. Install your .bin
4. Install 1.1.8

?
2015-7-25
Use props
robrogkr
lvl.2
Flight distance : 293976 ft
Poland
Offline

johnmaetta@comc Posted at 2015-7-26 04:46
So, here are the steps:

1. Install your .bin

yes, proceed in this order
2015-7-25
Use props
skydancer11
lvl.2

Israel
Offline

Tried the bin file.
Successfully Downgrade my P3P to 1.1.9.
2015-7-26
Use props
SPITHAS
lvl.1

Greece
Offline

skydancer11 Posted at 2015-7-26 16:10
Tried the bin file.
Successfully Downgrade my P3P to 1.1.9.

Im one of these persons that downgrade succesfully to 1.1.9 . I finally test it yesterday and it flyed perfect.Also VPS worked again without any problem.How can i find the results to post ti?
2015-7-26
Use props
epsilon1966
lvl.1

United States
Offline

Downgrade results for my p3p.
Installed the .bin file successfully, then the 1.19 .bin file successfully
I then Tried to apply the 1.18 .bin file several times with no success
It seems that this service .bin file only rolls back to 1.19 successfully for my phantom 3 Pro
I did this service .bin and  1.19 update several times successfully.
Then tested the drone indoors with vps on.   Works perfectly indoors
I also did a low hover test outdoors  vps works perfectly.   
I then did a flight stability test at various heights and distances for approximately 45 mins.  ( 2 batteries worth)
The drone seems all well again   Thanks so much Robrogkr for allowing me to test your service .bin file
I am going to continue to fly and update my progress
2015-7-26
Use props
info.u3ds
lvl.1

Netherlands
Offline

[00067197]========== 2015.06.27 10:46:40. boot(15) ============
[00067245]Packet [C:\P3X_FW_V01.02.0004.bin] detected, card sn [0xb0ce13f7].
[00067290]Packet upgrade start...

[00067349]Packet checking...
[00067399]Done.

[00067447]Version checking[1]...
[00067526][03 05][00] v34.2.0.9 -> v34.2.0.9
[00067608][03 06][00] v2.2.6.12 -> v2.2.6.12
[00067664][04 00][00] v1.38.0.9 -> v1.38.0.9
[00067732][09 00][00] v1.7.0.3 -> v1.7.0.3
[00067864][11 00][00] v1.6.0.0 -> v1.6.0.0
[00067959][12 00][00] v1.8.0.0 -> v1.8.0.0
[00068041][12 01][00] v1.8.0.0 -> v1.8.0.0
[00068141][12 02][00] v1.8.0.0 -> v1.8.0.0
[00068239][12 03][00] v1.8.0.0 -> v1.8.0.0
[00068393][15 00][00] v1.1.2.0 -> v1.1.2.0
[00068494][17 00][00] v1.1.1.6 -> v1.1.1.6
[00068631][17 01][00] v1.0.2.5 -> v1.0.2.5
[00068708][19 00][00] v1.0.8.96 -> v1.0.8.96
[00068753][01 00][00] v1.15.3056 -> v1.15.3056
[00068800][01 01][00] v1.15.3056 -> v1.15.3056
[00068863][08 00][00] v0.11.0.4 -> v0.11.0.4
[00068910]Packet upgrade cancelled at version checking.



[00013563]========== 2015.07.25 14:48:02. boot(15) ============
[00013610]Firmware [C:\XXXXXXX.bin] detected, card sn [0xb0ce13f7].
[00013657][17 01] Firmware upgrade start...
[00072854][17 01] Firmware upgrade finished successfully.
[00072909]Done.

[00013397]========== remo-con disconnect. boot(15) ============
[00013529]Packet [C:\P3X_FW_V01.01.0009.bin] detected, card sn [0xb0ce13f7].
[00013576]Packet upgrade start...

[00013633]Packet checking...
[00013687]Done.

[00013734]Version checking[1]...
[00013819][03 05][00] v34.2.0.9 -> v34.2.0.8
[00013894][03 06][00] v2.2.6.12 -> v2.1.6.18
[00013953][04 00][00] v1.38.0.9 -> v1.36.0.0
[00014014][09 00][00] v1.7.0.3 -> v1.7.0.3
[00014138][11 00][00] v1.6.1.0 -> v1.6.0.0
[00014234][12 00][00] v1.8.0.0 -> v1.8.0.0
[00014338][12 01][00] v1.8.0.0 -> v1.8.0.0
[00014434][12 02][00] v1.8.0.0 -> v1.8.0.0
[00014536][12 03][00] v1.8.0.0 -> v1.8.0.0
[00014706][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014789][17 00][00] v1.1.1.6 -> v1.1.1.2
[00015398][17 01][00] v0.0.0.0 -> v1.0.2.4 need upgrade.
[00015478][19 00][00] v1.0.8.96 -> v1.0.8.59
[00015529][01 00][00] v1.15.3056 -> v1.6.2736
[00015575][01 01][00] v1.15.3056 -> v1.5.2735
[00015639][08 00][00] v0.11.0.4 -> v0.11.0.4
[00015687]Done.

[00017736]Waiting for user confirm...
[00027784]Timeout, start upgrade automatically.

[00027881]Firmware upgrading[1]...
[00027944][17 01] Firmware upgrade start...
[00087462][17 01] Firmware upgrade finished successfully.
[00087513]Done.

[00087561]Version checking[2]...
[00087659][03 05][00] v34.2.0.9 -> v34.2.0.8
[00087739][03 06][00] v2.2.6.12 -> v2.1.6.18
[00087793][04 00][00] v1.38.0.9 -> v1.36.0.0
[00087874][09 00][00] v1.7.0.3 -> v1.7.0.3
[00088002][11 00][00] v1.6.1.0 -> v1.6.0.0
[00088089][12 00][00] v1.8.0.0 -> v1.8.0.0
[00088193][12 01][00] v1.8.0.0 -> v1.8.0.0
[00088294][12 02][00] v1.8.0.0 -> v1.8.0.0
[00088418][12 03][00] v1.8.0.0 -> v1.8.0.0
[00088593][15 00][00] v1.1.2.0 -> v1.1.2.0
[00088693][17 00][00] v1.1.1.6 -> v1.1.1.2
[00088833][17 01][05] v1.0.2.4 -> v1.0.2.4
[00088908][19 00][00] v1.0.8.96 -> v1.0.8.59
[00088962][01 00][00] v1.15.3056 -> v1.6.2736
[00089010][01 01][00] v1.15.3056 -> v1.5.2735
[00089065][08 00][00] v0.11.0.4 -> v0.11.0.4
[00089114]Packet upgrade finish successfully.



From v1.26 to v1.19 Tomorrow I'll post fly results
2015-7-26
Use props
cegio
lvl.4
Flight distance : 671257 ft
  • >>>
Spain
Offline

I´m moderator in a spanish forum about p3, 2 members has tested the bin services file this weekend with p3pro
One of them erased firmware and try to upgrade to 1.1.9 but , he had any problem because the txt says that phantom was already on that version, he changed the microsd and he tried again,he erased firmware and upgraded to 1.1.9 and everything was ok.

the other guy ,  has downgraded to 1.8 , downgrading first to 1.9

these guys  have flown 2 batteries without problems
2015-7-26
Use props
bigbenny98
lvl.2

United States
Offline

............
2015-7-26
Use props
tcchow.g.m
Second Officer
Flight distance : 9647812 ft
Hong Kong
Offline

robrogkr Posted at 2015-7-26 05:09
yes, proceed in this order


Here are my results;
Test 1.
1. Use the .bin to earse 1.2.6 with success,
2. insert the 1.1.8 down form 1.2.6 with success,
3. insert the 1.1.9 up form 1.1.8 with success,
4. insert the 1.2.6 up form 1.1.9 with success,
The reason why I try to go back up to 1.2.6  because as read at different forum some people did not have any problem with it, so I am assuming the 1.2.6 bin file wan't install correctly. Had a week of test fly with that 1.2.6 it works perfectly with a tinny proble ( I bet some people doesn't belive what I said, but it is true. )

Test 2
1. insert the .bin to earse again form 1.2.6 with success,
2.  insert the 1.1.8 down form 1.2.6 with success,
3.  insert the SDK P3X_FW_V01.01.1007 rm 1.1.8 with success,
Because I want to play with those Litchi & FPV and DSI third party apps, I had that since then till now. It work perfectly without any issue.

Test 3
1. insert the .bin to earse  SDK P3X_FW_V01.01.1007 with success,
2.  insert the 1.1.8 down form SDK P3X_FW_V01.01.1007 with success,
As I already reported to Robrogkr about that issue, which means that .bin file are also works with the  SDK P3X_FW_V01.01.1007. Now I am back on to the  SDK P3X_FW_V01.01.1007 and so happy to playing with the third party apps. Hope the above will help others who would like to try to down grade and to belive that .bin are are really works with our P3 P/A. Thank you Robrogkr.

Packet: P3X_FW_V01.02.0006.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.01.0009.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:15 remo-con disconnect======
Packet: P3X_FW_V01.01.0008.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:15 remo-con disconnect======
Packet: P3X_FW_V01.02.0006.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.01.0008.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.01.1007.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.01.0009.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.01.1007.bin
Upgrading ...
Result: Success.


2015-7-26
Use props
info.u3ds
lvl.1

Netherlands
Offline

''
00088693][17 00][00] v1.1.1.6 -> v1.1.1.2
[00088833][17 01][05] v1.0.2.4 -> v1.0.2.4
[00088908][19 00][00] v1.0.8.96 -> v1.0.8.59
[00088962][01 00][00] v1.15.3056 -> v1.6.2736
[00089010][01 01][00] v1.15.3056 -> v1.5.2735
[00089065][08 00][00] v0.11.0.4 -> v0.11.0.4
[00089114]Packet upgrade finish successfully.



From v1.26 to v1.19 Tomorrow I'll post fly results ''




Flying again!
2015-7-27
Use props
klaasjan
lvl.3

Netherlands
Offline

It possible that somoene sents the file to kjh100 (at) hotmail.com ?

Many thanks
2015-7-27
Use props
rpainrpain
New

Australia
Offline

Hi Robrogkr,

Could you please send me a friend request so I cam PM you for the file?

Thank you so much!
2015-7-27
Use props
mikaproductions
lvl.2

France
Offline

Hi can you send me also the 1.18 for the phantom 3 pro my email Mikaproductions2@hotmail.fr.  Thanks
2015-7-27
Use props
robrogkr
lvl.2
Flight distance : 293976 ft
Poland
Offline

mikaproductions Posted at 2015-7-27 21:31
Hi can you send me also the 1.18 for the phantom 3 pro my email Mikaproductions2@hotmail.fr.  Thanks ...


1.1.8 for P3P you can find here - www  .    download.dji-innovations.com/downloads/phantom_3/en/Phantom_3_Professional_Firmware_v1.1.8_en.zip
2015-7-27
Use props
bigbenny98
lvl.2

United States
Offline

robrogkr,
Did I manage to send you a friend request? I tried to. How can I receive the .bin file? Thank you for your help.
2015-7-27
Use props
mikaproductions
lvl.2

France
Offline

Sorry I mean the file for downgrade my P3P 1.26 to 1.19 version

My E-mail is Mikaproductions2@hotmail.fr
2015-7-27
Use props
1320frank
lvl.3
Flight distance : 2624856 ft
United States
Offline

I received the .bin and here is my results so far for P3P.

1) Watched video in this thread
2) Backed up .DAT flight file to pc (not necessary)
3) Use .bin to erase 1.2.6 - success
4) Install 1.1.9 - made a few beeps and stopped. Eject card and reinserted, update process then began and finished in normal time
5) Use .bin to erase 1.1.9 - success
6) Install 1.1.8 - same as #4 and again finished in normal time. Checked pilot app menu and it showed 1.20 and 1.1.9 (wtf?)

After result log file and confirming it in deed showed 1.1.8 was installed at this point I uninstalled the 1.20 pilot app and installed app version 1.10.
I then open 1.10 pilot app go to menu and check versions. There it shows pilot app 1.10 and firmware 1.2.6 . (wtf!!). So I loaded pilot app 1.20 back
accepted the fact that I can't yet run the 1.1.8 version. I ran the .bin and loaded version 1.1.8. I checked the menu and it did show 1.20 and 1.1.9.
But when I double check the firmware result file it shows version 1.1.8 is in deed what is loaded.

I will need some suggestions on how to get 1.1.8 working on a P3P. In the meantime I do successfully have version 1.1.9 working.

2015-7-27
Use props
Stephentaber
lvl.4
Flight distance : 183458 ft
  • >>>
United Kingdom
Offline

Hi all,

I have been sat looking at my unstable P3A for far to long. Would someone please be kind enough to let me have the .bin file to rollback my P3A? I have all the previous firmware downloaded and ready to go, just need to bin file. My email is stephentaber@me.com

Thanks.
2015-7-27
Use props
bernie This user has been deleted
Tip: the author has been banned or deleted automatically shield
2015-7-27
Use props
robrogkr
lvl.2
Flight distance : 293976 ft
Poland
Offline

1320frank@comca Posted at 2015-7-28 00:21
I received the .bin and here is my results so far for P3P.

1) Watched video in this thread


Frank,
to show in Pilot app the correct version after update, sometimes you need to do the following steps:
1/ switch on RC
2/ switch on P3
3/ connect your TAB or Phone to the Internet (of course Tab/phone just connected to the RC)
4/ start your Pilot app
After that, verify which version show you Pilot app,, if it is still not last updated version restart only Pilot app.
2015-7-27
Use props
mikaproductions
lvl.2

France
Offline

robrogkr Posted at 2015-7-27 22:35
1.1.8 for P3P you can find here - www  .    download.dji-innovations.com/downloads/phantom_3/en/Ph ...

Sorry I was talking about the bin file ,,,,, I need to roll back my p3p to 1.19. Thanks  ;-). My e-mail Mikaproductions2@hotmail.fr.     
2015-7-27
Use props
klaasjan
lvl.3

Netherlands
Offline

Is it also possible to downgrade the remote controller?
2015-7-27
Use props
robrogkr
lvl.2
Flight distance : 293976 ft
Poland
Offline

klaasjan@haitsm Posted at 2015-7-28 03:04
Is it also possible to downgrade the remote controller?

This file does not work with RC.
You don't need to change anything on the controller
2015-7-27
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules