djiuser_6GQqRTuewKS9
New
United States
Offline
|
Here's a tiny feature update that I didn't see mentioned....
Powering off now turns the camera head 180 degrees in the other direction. This lets you easily put the Pocket 2 into it's case with the power button INSIDE the case (without needing to manually turn the head around).
Future Firmware Request
One big feature improvement I would like to see in the future, is getting rid of the precise sequence of steps one has to do to connect the Pocket 2 to a phone via USB-C cable. Right now, connecting the Pocket 2 via the USB-C plug on the bottom of the pocket is very... messy and specific.
You need to:
1. Plug USB-C cable into Pocket 2 and turn it on.
2. Turn on Phone and start App
3. Plug USB-C cable into Phone
You MUST have the USB-C cable plugged into the Pocket 2, have the Pocket 2 turned on, and the Mimo app running BEOFRE plugging it into the phone.
If you plug the USB-C cable into the phone first, and then the Pocket 2, you get a message asking if you want to "Connect to Computer" along with two options on the Pocket 2 screen - ACCEPT and REJECT.
If you select ACCEPT, then you can view and transfer files, but you can NOT see live video on the phone.
If you select REJECT, then the Pocket 2 doesn't do anything.
THIS IS VERY MESSY.
The order of connecting should not matter! And instead of giving an ACCEPT or REJECT options, the screen should give 3 clear choices....
Live View
Transfer Files
Charge
Hopefully a future firmware update can resolve this issue/confusion!
|
|