Please select Into the mobile phone version | Continue to access the computer ver.
Gimbal not staying in the off position?
242 4 1-8 22:31
Uploading and Loding Picture ...(0/1)
o(^-^)o
I.B.S. Survivor
lvl.1

United States
Offline

Hello, I just purchased my DJI Pocket 2 this week and I have run in to a slight problem. When I turn off my device the gimbal goes to it's off position but after a few seconds it disengages and the gimbal is completly free and moves around. Has anyone experienced this problem before?


I don't know if it's my unit specific but it has done this ever since I got it out of the box. Any suggestions or advice will help. Thanks

immediatly off

immediatly off

after 15 seconds

after 15 seconds


1-8 22:31
Use props
EFRPIC
First Officer

United States
Offline

This behavior is normal. To provide more time to utilize the "lock" to insert the unit in the case, the time has been increased in the very recent firmware update.
1-8 22:59
Use props
DJI Gamora
Super Moderator

Offline

Hi, I.B.S. Survivor. Thanks for reaching out! Could check and confirm what's the firmware version of your DJI Pocket 2? We just released the V01.02.00.50 that increased the time that the gimbal stays in position when powered off in order to fit it into the cover.
1-9 00:18
Use props
fansfe82067d
Captain
Australia
Offline

If the gimbal head stayed locked in the "off" position all the time - which is done by power - then the battery would be flat next time you used it.
1-9 00:19
Use props
I.B.S. Survivor
lvl.1

United States
Offline

Thank you very much for your responses. This makes sense now.
1-11 16:04
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules