Please select Into the mobile phone version | Continue to access the computer ver.
Phantom 3 Standard IMU Calibration error
540 4 1-12 09:08
Uploading and Loding Picture ...(0/1)
o(^-^)o
mikemul
lvl.1

Netherlands
Offline

hello everyone, I have a Phantom 3 standard for 3 years now with no problems.  I flew the drone in the morning and when I wanted to fly again in the evening I suddenly had to calibrate my IMU. when I did this there was an error after 50% that I had to start again, when I started again I got a message after 1% with: Unknow error please recalibrate the drone.  
  
I have tried to calibrate the drone in several places but nothing helps. the values ​​in the IMU screen are all around 0 / 0.01 except for the bottom bar with compass, which is on X-80 Y-806 Z-1300 and keeps changing while the drone is stationary.
  
what could this be???

greetings Mike

1-12 09:08
Use props
Peterx
Captain
Flight distance : 1497290 ft
Germany
Offline

Did the drone stand on an even leveled place and was the AC cool enough?
1-22 14:42
Use props
mikemul
lvl.1

Netherlands
Offline

Peterx Posted at 1-22 14:42
Did the drone stand on an even leveled place and was the AC cool enough?

yes the drone is every time i tried to calibrate on a leveled place, and the temp is not the problem i have tried it outside with 2degrees and inside with 20 degrees no differents.
1-23 05:54
Use props
Peterx
Captain
Flight distance : 1497290 ft
Germany
Offline

The Mod value 0/0,01 is normal. XYZ chanbe ??? shoudnt be there. I´ll have a look on my P3S
1-23 08:35
Use props
mikemul
lvl.1

Netherlands
Offline

Peterx Posted at 1-23 08:35
The Mod value 0/0,01 is normal. XYZ chanbe ??? shoudnt be there. I´ll have a look on my P3S

here the values
1-23 10:24
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules