Added photo capture, video recording, autofocus, and focus pull support for Nikon Z5, Z7II, Z6II, D780 and D6 cameras with supported Nikkor lenses using the Multi-Camera Control Cable (MCC-C). Added photo capture, video recording, autofocus, and focus pull support for Nikon D500 cameras with supported Nikkor lenses using the Multi-Camera Control Cable (MCC-B). To use autofocus, press halfway down on the camera control button of the gimbal.
Added photo capture, video recording, autofocus, and focus pull support for Canon EOSR5, EOSR6, 1DX III cameras with supported Canon lenses using the Multi-Camera Control Cable (MCC-C). Added photo capture, video recording, autofocus, and focus pull support for Canon 5DSR and 200D II cameras with supported Canon lenses using the Multi-Camera Control Cable (MCC-B). To use autofocus, press halfway down on the camera control button of the gimbal.
Added photo capture, video recording, autofocus, and focus pull support for Panasonic S5 cameras with supported L mount lenses using the Multi-Camera Control Cable (USB-C). To use autofocus, press halfway down on the camera control button of the gimbal.
Added video recording, autofocus, and focus pull support for Sony A7S3 and A7C cameras with supported Sony E mount lenses using the Multi-Camera Control Cable (USB-C). To use autofocus, press halfway down on the camera control button of the gimbal.
Added video recording, autofocus, and focus pull support for Sigma FP cameras with supported Sigma original lenses using the Multi-Camera Control Cable (USB-C). To use autofocus, press halfway down on the camera control button of the gimbal.
Notes:
Make sure that the DJI Ronin App is the latest version when updating the firmware.
Make sure Ronin-S is powered off and update the firmware through the DJI Pro Assistant for Ronin by connecting the USB-C port on Ronin-S to your computer. Do not disconnect the gimbal from the computer while updating.
After the update is complete, unplug the USB-C cable from Ronin-S and proceed to power on the gimbal.
If Ronin-S has a camera attached and is turned on while updating the firmware, make sure to protect the camera and lens as the motors will shut off during the update.
If the firmware update fails, restart the Ronin-S and retry.