gabbudronezzy
lvl.1
Italy
Offline
|
Hello everyone, i just bought a used P3S and I'm having a very bothering problem.
Almost everytime i connect it to the DJI GO app, at some point it disconnects and i lose the video feedback.
I actually managed to succesfully fly the aircraft a couple of times with almost no issues, i believe the longest flight lasted
about 6 minutes before disconnecting, fortunately it was really close and i managed to land safely.
It's really annoying as i bought it primarily for video purposes and when this happens i can't start/stop recording.
i'll try to give a quick description of what i do, maybe it can help in identifying my problem:
- I turn on the remote, wait a bit and turn on the aircraft, the two connect, RC status LED turns green
- Turn on airplane mode and then wi-fi on the phone, wait for succesful connection
- Open DJI GO app, wait for it to recognize the aircraft and enter Camera mode
From this point on:
- Most of the times (Let's say 8 out of 10) all is working fine, I get live image, i get notified of Beginner Mode (which i activated), i have all telemetry, if GPS signal is strong it even displays "Safe to Fly", and then at a completely random time (In flight or on ground seems to make no difference) the image suddenly goes black and white, all telemetry is gone (no bars, only N/A), the status bar displays "Disconnected" or "Remote control signal weak", and the remote status LED turns red, yet i'm still able to control the drone and the gimbal from it.
- Rest of the times Camera mode starts already with "Remote control signal weak" and no telemetry, remote LED turns red as soon as i enter camera mode, and yet i'm still in full control of aircraft and gimbal.
As far as I know the AC never had any crashes, you can really never know buying used, but the seller felt like an honest guy and the drone itself looks as good as new.
Hope you guys can help, i'm getting kinda desperate.
Aircraft FW: 1.9.20
As far as the App goes, i tried three phones, all three with same results:
(Also noticed the seller was using it with an iPhone, don't know if it's any help.)
Samsung Galaxy J3 (2016)
Android 5.1.1
App: 3.1.61
Huawei P10 lite
Android: 8.0.0
App: 3.1.61
Xiaomi Redmi Note 9 Pro
MIUI: 12.0.2
Android: 10.QKQ1.191215.002
App: 3.1.62
I read maybe a firmware and app downdgrade could solve this, any working guide on how to do that?
Thank you in advance.
Edit: I feel i should add that the App won't reconnect untill i turn off and on again the drone and the RC, and it does the same problem all the times.
|
|