Please select Into the mobile phone version | Continue to access the computer ver.
"Country code not activated" message in FPV Goggles
Uploading and Loding Picture ...(0/1)
o(^-^)o
-= Pathfinder =-
lvl.2
Flight distance : 366857 ft
  • >>>
Canada
Offline

I recently got an FPV Combo.  
Downloaded the most recent Android version of the DJI Fly app direct from the DJI website.  
Plugged the goggles into my Android phone and powered up the FPV drone, controller, goggles.



Did the latest firmware update.

Everything works now, except for 1 thing.  I have a persistent red bar message in my Goggles that says "Country code not activated."

What's a country code?  What does that alert mean and how do I get rid of it?

Thanks for any help!
3-13 09:37
Use props
-= Pathfinder =-
lvl.2
Flight distance : 366857 ft
  • >>>
Canada
Offline

FWIW, I'm in Canada.
3-13 09:37
Use props
-= Pathfinder =-
lvl.2
Flight distance : 366857 ft
  • >>>
Romania
Offline

Figured it out!  Here's how I fixed it.

To get rid of the country code message, do this:

- Download the latest DJI Assistant 2 from https://www.dji.com/dji-fpv/downloads.
- Turn on the aircraft, remote controller and goggles.  
- Plug each device one at a time into your computer and refresh the firmware in each device.  
- After the refresh, it country code will be properly set.
3-14 09:37
Use props
Drekko
Second Officer
Flight distance : 55272 ft
Australia
Offline

-= Pathfinder =- Posted at 3-14 09:37
Figured it out!  Here's how I fixed it.

To get rid of the country code message, do this:

Hi

I am getting this issue to. I am in Australia

Do you need to have your phone always connected with the DJI Fly App to the drone when you fly ? Or should it be picking up GPS without it like the Mavic 2 pro?
3-15 15:57
Use props
epicdroneguy
lvl.1
United States
Offline

I updated everything and I still have the code
3-23 20:46
Use props
djiuser_70Ak0WNXtrPO
New

United States
Offline

Same problem I update everything and still have Country code issue
3-26 05:41
Use props
Winkle
lvl.2
Canada
Offline

If you're still getting the error message after doing all the firmware updates/refreshes, plug the goggles into your phone via the OTG cable and start the DJI Fly app with the drone, goggles and controller all turned out, while you're outside or in an area where the drone can get a good GPS signal, then it should use the GPS to set your country code and fix itself. That's what I had to do to get it to work.
3-29 16:39
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules