Please select Into the mobile phone version | Continue to access the computer ver.
Can we put P3 propellers on P2 motors ?
179 4 3-17 15:45
Uploading and Loding Picture ...(0/1)
o(^-^)o
gomidas
lvl.1

Turkey
Offline

I have f450 body. I am planning to buy P3 propellers and P2 motors. Do propellers and motors fit each other without problem ? If they fit which battery I should use ?
3-17 15:45
Use props
JetSam
Captain
Flight distance : 2489482 ft
Spain
Offline


Welcome gomidas !  DJI Phantom 2 & 3 Series use same propellers
3-17 23:07
Use props
JetSam
Captain
Flight distance : 2489482 ft
Spain
Offline

3-17 23:11
Use props
gomidas
lvl.1

Turkey
Offline

JetSam Posted at 3-17 23:07
Welcome gomidas !  DJI Phantom 2 & 3 Series use same [view_image] propellers

I am asking because, in the store that is served as phantom 3 propellers. Yes the picture you showed me looks like exactly same with that. So I can buy a p2 motor and put it.
3-17 23:31
Use props
Mark The Droner
Captain
Flight distance : 2917 ft
United States
Offline

Yes they will thread on the same.  Yes you can put P3 props on a P2 which would have P2 motors.  They are 9450 props.  The original P2 props had metal threaded hubs and are 9443 props.  The prop changed with the P2 V3 which had plastic composite threads and were 9450.  But they both thread on the same.  The P3 which came out later uses those same 9450 props.  If you have an F450 body, I guess you'd need an F450 battery.  You should measure the distance between the motors and make sure there is clearance.  I say this because I know the original Phantom props were shorter in length which implies the F450 may possibly be a shorter distance motor to motor.  Good luck.
3-18 10:03
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules