Hello I'm looking for info on two things. First is my "Arm Brace" package did not have screws with it. I'm trying to find out the size and type of screws used for them. Also I'm looking for a parts list (screws) for the drone itself with type and size of screws.
The ones on the bottom side of the battery opening are M2 x 4mm.
The ones around the back on top are M2 x 8.5mm.
The larger ones inside the battery well are M2.5. 2mm of the tips of these screws aren't threaded. The threaded section plus the tip is 6.5mm long.
You don't have screws from the other side of the drone you can measure?
Duane Degn Posted at 3-24 09:18
The ones on the bottom side of the battery opening are M2 x 4mm.
The ones around the back on top are M2 x 8.5mm.
The larger ones inside the battery well are M2.5. 2mm of the tips of these screws aren't threaded. The threaded section plus the tip is 6.5mm long.
Excellent!
Thanks!
What about the Arm screws? I got none in that package
laszlo Posted at 3-24 10:55
I never got them, I'm talking about the Arm Braces, not that actually Arms...sorry my bad for not explaining correct
Sorry, I didn't notice the "Brace" part of your question. I thought you broke one of your arms and were replacing it.
I don't think I knew about the option of Arm Braces when I first replied.
To be clear, the sizes I listed are for the original drone, not the brace. Have you contacted DJI? Maybe they could send you the appriate screws.
Sadly I lost one of the tightening for the throttle stick at the back of the controller.
These are like M3 screws, but with a smaler than M3 head. ...does anybody know where to get replacement? Does DJI sell those in their shop?
What size screw is used to hold down the DJI FPV DRONES IMU MODULE? I lost 1 screw while replacing the IMU module. Where can I order replacement screw?
Photo: https://ibb.co/Kw26B1Jy
Duane Degn Posted at 2021-3-24 09:18
The ones on the bottom side of the battery opening are M2 x 4mm.
The ones around the back on top are M2 x 8.5mm.
The larger ones inside the battery well are M2.5. 2mm of the tips of these screws aren't threaded. The threaded section plus the tip is 6.5mm long.
Thank you. I purchased a go pro mount that uses four screws on the FPV Drone. Two on the top front and two on the side. I'm assuming these are M2's as well..... just need to measure to get them a little longer.