Please select Into the mobile phone version | Continue to access the computer ver.
Phantom 2 Vision camera hum noise
1421 4 2014-9-21
Uploading and Loding Picture ...(0/1)
o(^-^)o
eliezert55
lvl.1

Germany
Offline

If someone have experienced a similar situation and found a fix solution to this problem, if you can share the information I will gladly appreciated. The problem is a loud hum noise (static) generated from inside the camera components. If you press the camera body the noise stop for a few seconds. I did opened the camera (void the warranty) to investigate from where the noise is coming from, but unfortunately no luck at all. A terrible annoyance noise, please advise.

Elie
2014-9-21
Use props
b.w.j
Second Officer

Denmark
Offline

There is a fan inside to cool the processor.
2014-9-21
Use props
DBS
lvl.2

United States
Offline

No... there is no fan inside to cool the processor... sorry
2014-9-21
Use props
b.w.j
Second Officer

Denmark
Offline

DBS Posted at 2014-9-22 05:45
No... there is no fan inside to cool the processor... sorry

In my P2V there is.
When turning off cam, the fan stops.
2014-9-24
Use props
hd_ultra
lvl.4

United States
Offline

Phantom 2 V+ does not have a fan inside the housing. You are probably hearing one of the three motors. Mine does this from time to time.

Not saying you done this, just to throw it out there. A lot of people forget to release the camera and leave the camera lock on. This will cause problems with the motors overtime and damage them.
2014-9-24
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules