Ian.taylor4
lvl.1
Australia
Offline
|
Hi,
DJI Mini 2 with latest firmware installed. Flying in normal mode. I launched from the top of a waterfall (set at 0m altitude), then flew out over the falls. Descended to about -6m from my reference height. Initiating full down left stick to descend the waterfall started landing mode, which I had to cancel. This occured repeatedly.
After cancelling the landing initiation, with the aircraft at -7m, it slowly started climbing. This aircraft response for flights below 0m was confirmed multiple times.
I was uncomfortable flying the landing initiation as below the aircraft was a pool of water from waterfall, and I wanted the downward vision system to identify this.
Is the only option to fly such a profile to apply left stick down input, but not at full deflection that would initiate landing ?
I recommend DJI provide the ability in DJI Fly to allow flight below 0m reference, and adjust the flight software to remove the slow ascent of the aircraft when flying below 0m.
Thanks
Ian
|
|