Please select Into the mobile phone version | Continue to access the computer ver.
Temperature measurements
137 3 5-9 07:28
Uploading and Loding Picture ...(0/1)
o(^-^)o
Abdel Rahman
lvl.1

Finland
Offline

Hi, I am a new memeber and Please really I hope to get help
I have Dji Mavic 2 dual enterprise drone , currently I am doing thermal imaging measurements and analysis on Solar PV modules to determine the hot spots in the PV modules.
Now I want to include the temperature measurements to the picture but I don't know how .  
How can I shoot pictures in "thermal mode" with temperature measurements as same in this photo "which is just an example about what I mean"
IMG_3301.jpg
5-9 07:28
Use props
Syntropix
lvl.4
Flight distance : 697552 ft
Bulgaria
Offline

DI Mavic 2 Enterprise suport only print screen. This not *. rjpg
5-11 03:28
Use props
Abdel Rahman
lvl.1

Finland
Offline

Syntropix Posted at 5-11 03:28
DI Mavic 2 Enterprise suport only print screen. This not *. rjpg

Thank you , You mean screen shoot of controller ?
5-11 09:45
Use props
Syntropix
lvl.4
Flight distance : 697552 ft
Bulgaria
Offline

Yes. When activating frame temperature measurement, a print screen button appears to the thermal file *.jpg, but it is not real * .rjpg.
P.S. Keep in mind that the temperature correction for the reference value can deviate by more than +-7-8 degrees !!
Especially at low temperatures below 0 degrees Celsius !! The accuracy of the measurement depends a lot on the distance of the sensor to the measured area / point /!
5-17 03:13
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules