Please select Into the mobile phone version | Continue to access the computer ver.
Beta firmware for RS2 (hotfix for BlackMagic)
2755 29 5-13 04:15
Uploading and Loding Picture ...(0/1)
o(^-^)o
DJI-Paul
Second Officer
Flight distance : 41159547 ft
  • >>>
South Africa
Offline

Thank you for your interest in this beta firmware. By downloading or using this beta firmware, you hereby signify that you have read carefully and that you understand and agree to abide by the terms and conditions herein:
1. Beta firmware is not yet fully tested and is mainly used to gather feedback prior to regular release. This enables users to be involved with the development process and for any necessary changes to be made prior to the regular release schedule.
2. The beta firmware and all related services are provided "AS IS" and, to the maximum extent allowable under law, DJI disclaims all warranties of any kind, whether express or implied, including any warranties of merchantability, fitness for a particular purpose, and non-infringement. Without limiting the foregoing, DJI does not warrant that operation of the beta firmware will be uninterrupted or error-free, that the beta firmware will be compatible with any products including designated DJI product models.
3. DJI will not be liable to you for any personal injury, property damage, lost profits, cost of substitute goods, loss of data or any other form of direct or indirect, special, incidental, consequential or punitive damages from any causes of action arising out of or related to this agreement or the beta firmware, whether arising in tort (including negligence), contract, strict liability or otherwise, whether or not DJI has been advised of the possibility of those damages.
4. If you find any abnormality when using the beta firmware, we recommend that you take the following steps:
a. Send feedback on the problems you encounter. You may contact us through our firmware release channel (whether DJI’s Official Forum, or the Official DJI RS2/RSC2 Owners Facebook Group);
b. It’s possible to downgrade to a previous version of the official firmware. Set the gimbal to sleep mode, go back to the homepage of the App, and click the upgrade notice. The original gimbal firmware should then be restored.

RS2 Beta
RS 2 firmware version: 00.00.00.02

What’s New?

Fixed BMPCC camera control.



5-13 04:15
Use props
DJI-Paul
Second Officer
Flight distance : 41159547 ft
  • >>>
South Africa
Offline

5-13 04:16
Use props
Indio
First Officer
Flight distance : 71250 ft
  • >>>
Austria
Offline

many THANX !!!
5-13 04:42
Use props
Mr Sin
lvl.1
Flight distance : 92231 ft
Offline

Thank you!
5-14 07:26
Use props
Rob W
Captain
Flight distance : 94390 ft
  • >>>
Sweden
Offline

Thank you, DJI! I will install it tomorrow.

Hope DJI is also working also on a new Inspire 2 firmware, because the latest one is dangerous as you can loose control of the aircraft without being able to return control, and it is supposed to fix a dangerous issue with the previous firmware. So we only have the choice between two dangerous firmwares...
5-14 08:36
Use props
Rob W
Captain
Flight distance : 94390 ft
  • >>>
Sweden
Offline

Seems to work! I've only tested a little while, though.
5-14 23:32
Use props
Guido-Italy
Captain
Flight distance : 477008 ft
Italy
Offline

Tks DJI-Paul
5-16 02:25
Use props
Guido-Italy
Captain
Flight distance : 477008 ft
Italy
Offline

Hi DJI-Paul I downloaded beta but pressing rec button BMPCC doesn't start rec. Any information ? Thanks
5-16 04:07
Use props
Guido-Italy
Captain
Flight distance : 477008 ft
Italy
Offline

Guido-Italy Posted at 5-16 04:07
Hi DJI-Paul I downloaded beta but pressing rec button BMPCC doesn't start rec. Any information ? Thanks

Whith .02 version it' work !!!
5-16 05:04
Use props
johndus
lvl.1

United States
Offline

Guido-Italy Posted at 5-16 05:04
Whith .02 version it' work !!!

But now focus motor is broke
5-17 08:24
Use props
johndus
lvl.1

United States
Offline

Guido-Italy Posted at 5-16 05:04
Whith .02 version it' work !!!

But now focus motor is broke
5-17 08:25
Use props
Indio
First Officer
Flight distance : 71250 ft
  • >>>
Austria
Offline

johndus Posted at 5-17 08:24
But now focus motor is broke

no, is working for me with the focus dial
next i will test 3D focus
5-17 10:31
Use props
Guido-Italy
Captain
Flight distance : 477008 ft
Italy
Offline

johndus Posted at 5-17 08:24
But now focus motor is broke

no words !!!!
5-18 00:28
Use props
DJI-Paul
Second Officer
Flight distance : 41159547 ft
  • >>>
South Africa
Offline

johndus Posted at 5-17 08:25
But now focus motor is broke

The beta firmware didn't change anything else besides camera control. If you go back to your previous firmware is your focus motor working?
5-18 22:51
Use props
djimac
lvl.2
Belgium
Offline

Everything started working back for me with the .02 update, the record button and the focus button too.








5-22 11:01
Use props
djimac
lvl.2
Belgium
Offline

5-22 11:16
Use props
fans80db2774
New

United States
Offline

Can't seem to download the hot fix. When will this fix be coming to a regular RSC2 Pro firmware update? Or is there any way to downgrade from 7.3 firmware on the BMPCC4k?
5-26 11:13
Use props
fu64L
lvl.1

Germany
Offline

Everything works well! Both record button and focus wheel – fine!
Thank you!
5-26 13:49
Use props
betopicharillo
New

Brazil
Offline

Hello friends. How do I download
5-27 10:12
Use props
Guido-Italy
Captain
Flight distance : 477008 ft
Italy
Offline

Hi do you have any news about final fixed version ?
5-27 12:52
Use props
Indio
First Officer
Flight distance : 71250 ft
  • >>>
Austria
Offline

betopicharillo Posted at 5-27 10:12
Hello friends. How do I download

read the thread
5-27 13:13
Use props
Indio
First Officer
Flight distance : 71250 ft
  • >>>
Austria
Offline

fans80db2774 Posted at 5-26 11:13
Can't seem to download the hot fix. When will this fix be coming to a regular RSC2 Pro firmware update? Or is there any way to downgrade from 7.3 firmware on the BMPCC4k?

see the first post - it is in the app

for the BMPCC:
remove 7.3 setup -  download 6.9.6 >install and connect your camera

5-27 13:15
Use props
Mark Roush New Adjustment
New

United States
Offline


Hello. On my DJI app, when I click on Firmware it doesn't allow me to click on any of the options i.e. App Version, Firmware, RavenEye, IMU, GCU....

From that, I can't downgrade to try and get my record button to work.

I have a DJI RS-2 w/ BMPCC6k.

Advice?
6-12 11:42
Use props
Gravel guy
lvl.1
United States
Offline

Downgraded .02 and now the record button works on the main handgrip , but not on the remote cabled hand grip. . Can't DJI just fix this issue and be done with it?
6-13 18:17
Use props
Indio
First Officer
Flight distance : 71250 ft
  • >>>
Austria
Offline

Gravel guy Posted at 6-13 18:17
Downgraded .02 and now the record button works on the main handgrip , but not on the remote cabled hand grip. . Can't DJI just fix this issue and be done with it?

do you have also the latest firmware on your hand grip and camera?

or remount the adapter on the ronin

my set works as it should
6-14 08:19
Use props
Indio
First Officer
Flight distance : 71250 ft
  • >>>
Austria
Offline

beta 004 is available

better support for some steadycam units (tilta float,  . . . )
6-16 05:53
Use props
FVP
First Officer
France
Offline

I tried Beta 004 on my Steadycam.

- we still cannot deactivate the PAN and / or TILT motor


There is a Steadycam function:: panning is better but it is REALLY not enough for fast movements.
The tilt is unchanged and too smooth.
We need a fully locked down system for to be used on a Steadycam.

6-17 01:57
Use props
shkarinov
lvl.1

Russia
Offline

I have tried all firmware (01,02,04).
No one works with my bmpcc 6k with firmware 7.3.1
On 02 firmware rec button is working and if i change wheel to iso or aperture it works also. But focus is not working.
Returned back to 6.9.6 on bmpcc.

Wait for firmware that will fix focus wheel.
6-19 00:54
Use props
Indio
First Officer
Flight distance : 71250 ft
  • >>>
Austria
Offline

shkarinov Posted at 6-19 00:54
I have tried all firmware (01,02,04).
No one works with my bmpcc 6k with firmware 7.3.1
On 02 firmware rec button is working and if i change wheel to iso or aperture it works also. But focus is not working.

first there is no 7.3.1 firmware for the 6k > only for the 6k pro

for me, beta 002 give me focus wheel control for all of my sigma art, canon EF and tokina pro II lenses
on my 4k with metabones cine and also my 6k pro
6-19 05:11
Use props
macmediaavg
lvl.1
United Kingdom
Offline

Downgraded to .02 firmware and all aspects seems to be functioning correctly with the bmpcc 6k pro 7.3.1 update. Cheers
7-5 01:31
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules